greekskii Posted August 14, 2019 Report Share Posted August 14, 2019 5 hours ago, elmoputney said: Just remember you need to check them if you get anything that resembles a pick up, I thought I had a line bite last week turns out I'd been done and my rig wasn't performing for a while after that Or as Danny Fairbrass would say my rig was on the dance floor but with its trousers and pants rounds it's ankles getting laughed at even by bream That's the only real downside I can see to the multi rig it doesn't reset itself, if you're not sure give it a recast In order to combat this issue is use a hook bead to keep the loop in place. elmoputney 1 Quote Link to comment Share on other sites More sharing options...
elmoputney Posted August 14, 2019 Report Share Posted August 14, 2019 47 minutes ago, greekskii said: In order to combat this issue is use a hook bead to keep the loop in place. I was using one until I added the silicone dont know why I stopped adding one really, thanks will have a look later and probably use them again. Quote Link to comment Share on other sites More sharing options...
finchey Posted February 5, 2020 Report Share Posted February 5, 2020 If you like your multi rigs I found this an interesting article. 🙂👍https://therigfactor.wordpress.com/ bluelabel, elmoputney, B B and 2 others 3 2 Quote Link to comment Share on other sites More sharing options...
oscsha Posted February 6, 2020 Report Share Posted February 6, 2020 1 hour ago, finchey said: If you like your multi rigs I found this an interesting article. 🙂👍https://therigfactor.wordpress.com/ To tired to read all that right now , but oh dear that take on a confidence rig at the end of part 3 . I do like the multi rig though . finchey 1 Quote Link to comment Share on other sites More sharing options...
elmoputney Posted February 6, 2020 Report Share Posted February 6, 2020 5 hours ago, finchey said: If you like your multi rigs I found this an interesting article. 🙂👍https://therigfactor.wordpress.com/ Skim reading through that did make me think I hadn't fully explored the multi rig, might have another look into it finchey 1 Quote Link to comment Share on other sites More sharing options...
elmoputney Posted April 5, 2020 Report Share Posted April 5, 2020 The pva bag rig I was using started to annoy me tonight I really want to use bait screws but d rig aligner says no, or maybe yes but I will annoy you first so back and be faffy, so back with a fresh twist uncoated braid, tungsten aligned multi rig, that will do for now 😁 Quote Link to comment Share on other sites More sharing options...
emmcee Posted April 6, 2020 Report Share Posted April 6, 2020 Get a curve shank hook on there. Can honestly say, I've never lost a fish using a curve shank hook with the multi rig. A mate put me on to it. It Doesn't look right I grant you but it works. A bit of food for thought maybe, especially as you like to think things through . elmoputney and crusian 2 Quote Link to comment Share on other sites More sharing options...
elmoputney Posted April 6, 2020 Report Share Posted April 6, 2020 1 hour ago, emmcee said: Get a curve shank hook on there. Can honestly say, I've never lost a fish using a curve shank hook with the multi rig. A mate put me on to it. It Doesn't look right I grant you but it works. A bit of food for thought maybe, especially as you like to think things through . Will have a look into it I have some curve shanks in my hook collection 😂 I found a good way make it easy to thread as well the fox easy splice needle, because it's so thin goes through hooks, aligners and small rings with ease I didn't get on with it splicing but I've found a good use for it now 😁 Quote Link to comment Share on other sites More sharing options...
crusian Posted April 6, 2020 Report Share Posted April 6, 2020 11 hours ago, emmcee said: Get a curve shank hook on there. Can honestly say, I've never lost a fish using a curve shank hook with the multi rig. A mate put me on to it. It Doesn't look right I grant you but it works. A bit of food for thought maybe, especially as you like to think things through . So are you getting hook holds in the scissors , Emmcee ? , and would you recommend a Sz. 6 , or are you using Sz. 4s' as you targeting carp of 30lb+ ? . 😃 Quote Link to comment Share on other sites More sharing options...
emmcee Posted April 7, 2020 Report Share Posted April 7, 2020 14 hours ago, crusian said: So are you getting hook holds in the scissors , Emmcee ? , and would you recommend a Sz. 6 , or are you using Sz. 4s' as you targeting carp of 30lb+ ? . 😃 Size 4 Korda curve with korda N-trap soft hook link, with 9 out of 10 times its bang centre of the mouth. My loop is inch and half long that goes through the eye of the hook. I always over weight the pop up. And yes targeting 30s and 40s. But I've obviously caught much smaller fish on it and it's still bang centre. When I've used chod type hooks, I've had hook pulls, hooking in different parts of the mouth etc. yonny 1 Quote Link to comment Share on other sites More sharing options...
snowmanstevo Posted April 7, 2020 Report Share Posted April 7, 2020 26 minutes ago, emmcee said: Size 4 Korda curve with korda N-trap soft hook link, with 9 out of 10 times its bang centre of the mouth. My loop is inch and half long that goes through the eye of the hook. I always over weight the pop up. And yes targeting 30s and 40s. But I've obviously caught much smaller fish on it and it's still bang centre. When I've used chod type hooks, I've had hook pulls, hooking in different parts of the mouth etc. Would you not use a semi stiff braid mate to help a ‘done’ rig reset emmcee I’ve seen the lumps you catch so it obviously works but does it not worry you that with softer material it’s in a pile if fish do have you off yonny 1 Quote Link to comment Share on other sites More sharing options...
yonny Posted April 7, 2020 Report Share Posted April 7, 2020 6 minutes ago, snowmanstevo said: I’ve seen the lumps you catch Me too. I'd dearly love to hear the stories behind some of those kippers in the catch report/blog section (hint, hint). Especially some of the old Dinton fish. They are too cool to be kept quiet😁 snowmanstevo and elmoputney 2 Quote Link to comment Share on other sites More sharing options...
emmcee Posted April 7, 2020 Report Share Posted April 7, 2020 1 hour ago, snowmanstevo said: Would you not use a semi stiff braid mate to help a ‘done’ rig reset emmcee I’ve seen the lumps you catch so it obviously works but does it not worry you that with softer material it’s in a pile if fish do have you off Well the n-trap soft is coated so it's got some stiffness to it, obviously enough for it to work for me. Plus I use the tungsten rig sleeve which helps kick it away. And if I worried about how my rig was sitting then I don't think I'd leave it for more than 5mins in the water before checking it Haha. snowmanstevo 1 Quote Link to comment Share on other sites More sharing options...
emmcee Posted April 7, 2020 Report Share Posted April 7, 2020 1 hour ago, yonny said: Me too. I'd dearly love to hear the stories behind some of those kippers in the catch report/blog section (hint, hint). Especially some of the old Dinton fish. They are too cool to be kept quiet😁 Well once my little jobs around the house are done I might just do that. All my pics from back then are all photos so I'll either need to scan them or just take pics of them on my phone. Need to find them first though. Might do something like a favourite session from the lakes I've fished if I can find the pics to go with them. elmoputney, yonny, snowmanstevo and 3 others 4 2 Quote Link to comment Share on other sites More sharing options...
Its-grim-up-north Posted April 7, 2020 Report Share Posted April 7, 2020 19 minutes ago, emmcee said: Well once my little jobs around the house are done I might just do that. All my pics from back then are all photos so I'll either need to scan them or just take pics of them on my phone. Need to find them first though. Might do something like a favourite session from the lakes I've fished if I can find the pics to go with them. Looking forward to it 👍 Quote Link to comment Share on other sites More sharing options...
yonny Posted April 7, 2020 Report Share Posted April 7, 2020 42 minutes ago, emmcee said: I might just do that. Yeah man!! Quote Link to comment Share on other sites More sharing options...
crusian Posted April 7, 2020 Report Share Posted April 7, 2020 8 hours ago, emmcee said: Size 4 Korda curve with korda N-trap soft hook link, with 9 out of 10 times its bang centre of the mouth. My loop is inch and half long that goes through the eye of the hook. I always over weight the pop up. And yes targeting 30s and 40s. But I've obviously caught much smaller fish on it and it's still bang centre. When I've used chod type hooks, I've had hook pulls, hooking in different parts of the mouth etc. That's great , Emmcee , just what I needed to know , many thanks . I just need the lockdown to be relaxed , and I can give it a go . 😃 snowmanstevo and emmcee 2 Quote Link to comment Share on other sites More sharing options...
emmcee Posted April 8, 2020 Report Share Posted April 8, 2020 19 hours ago, crusian said: That's great , Emmcee , just what I needed to know , many thanks . I just need the lockdown to be relaxed , and I can give it a go . 😃 Just thought, I only use 16mm pop ups on this rig. Bait size my alter the hooking potential, I don't know for sure. Yet my mate he always goes against the grain, 6oz leads, 12inch or longer hooklinks if most are using 6-10 inch hook links and his pop ups for this rig are 20mm and he nails them also. My mate is currently fishing dinton and he will not use any other rig since he's gone over to this. I think in the 4yrs he's been using it he has only ever had 1 hook pull , which on a lake like dinton or any lake for that matter, you don't want hook pulls. And he always tells me how they were nailed when he goes to unhook them. crusian and elmoputney 2 Quote Link to comment Share on other sites More sharing options...
bluelabel Posted April 8, 2020 Report Share Posted April 8, 2020 Couldnt find a Kurve... tried it with a krank.. not too sure about that... tied with semi stiff N trap (the bait is a bouyant rubber tiger) looks odd Quote Link to comment Share on other sites More sharing options...
emmcee Posted April 8, 2020 Report Share Posted April 8, 2020 1 hour ago, bluelabel said: Couldnt find a Kurve... tried it with a krank.. not too sure about that... tied with semi stiff N trap (the bait is a bouyant rubber tiger) looks odd It doesn't look right at all, but boy it works. Or at least it has for me and a few mates that use a curve shank with it. Quote Link to comment Share on other sites More sharing options...
crusian Posted April 8, 2020 Report Share Posted April 8, 2020 1 hour ago, bluelabel said: Couldnt find a Kurve... tried it with a krank.. not too sure about that... tied with semi stiff N trap (the bait is a bouyant rubber tiger) looks odd It does look odd , Blue . One day maybe you'll be able to report back on how it worked . 😃 Quote Link to comment Share on other sites More sharing options...
bluelabel Posted April 8, 2020 Report Share Posted April 8, 2020 I'm not holding me breath...🙁 crusian 1 Quote Link to comment Share on other sites More sharing options...
elmoputney Posted April 8, 2020 Report Share Posted April 8, 2020 1 hour ago, emmcee said: It doesn't look right at all, but boy it works. Or at least it has for me and a few mates that use a curve shank with it. BMG do a krank chod hook which I happen to have a packet of 😁 I will try and knock one up later on if I can the out turned eye may improve on your rig , I may have a curve type hook too 🤔😉 Quote Link to comment Share on other sites More sharing options...
crusian Posted April 8, 2020 Report Share Posted April 8, 2020 6 hours ago, emmcee said: Just thought, I only use 16mm pop ups on this rig. Bait size my alter the hooking potential, I don't know for sure. Yet my mate he always goes against the grain, 6oz leads, 12inch or longer hooklinks if most are using 6-10 inch hook links and his pop ups for this rig are 20mm and he nails them also. My mate is currently fishing dinton and he will not use any other rig since he's gone over to this. I think in the 4yrs he's been using it he has only ever had 1 hook pull , which on a lake like dinton or any lake for that matter, you don't want hook pulls. And he always tells me how they were nailed when he goes to unhook them. Thanks very much for the additional info. , Emmcee . I'll twiddle around with the bait size , but I haven't got Big Boy Pants big enough to use a 6oz lead 😮. 😃 Quote Link to comment Share on other sites More sharing options...
emmcee Posted April 8, 2020 Report Share Posted April 8, 2020 2 minutes ago, crusian said: Thanks very much for the additional info. , Emmcee . I'll twiddle around with the bait size , but I haven't got Big Boy Pants big enough to use a 6oz lead 😮. 😃 Haha, neither do I. One thing though my mates takes are absolute rippers on these 6oz leads. With most anglers using 2oz - 4oz leads, the fish ain't got a clue what's hit them. snowmanstevo and crusian 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.