salokcinnodrog Posted April 6, 2022 Report Share Posted April 6, 2022 I know that I always try to keep it simple, and most of my rigs are the same as 20 years ago, but I have been playing with rigs recently. It might look ungainly, but has the curve of a chod rig, the spin of a 360 or Spinner rig and the hook attachment of a Multi-rig, with 2 tungsten pop-up sinkers. Boom material is a doubled length of Snakeskin, and the mini link is 20lb Amnesia with a lighter tagged knot to prevent it coming off Quote Link to comment Share on other sites More sharing options...
newmarket Posted April 6, 2022 Report Share Posted April 6, 2022 7 minutes ago, salokcinnodrog said: I know that I always try to keep it simple, and most of my rigs are the same as 20 years ago, but I have been playing with rigs recently. It might look ungainly, but has the curve of a chod rig, the spin of a 360 or Spinner rig and the hook attachment of a Multi-rig, with 2 tungsten pop-up sinkers. Boom material is a doubled length of Snakeskin, and the mini link is 20lb Amnesia with a lighter tagged knot to prevent it coming off Is that a lead clip I detect ? 🤣 Quote Link to comment Share on other sites More sharing options...
salokcinnodrog Posted April 6, 2022 Author Report Share Posted April 6, 2022 42 minutes ago, newmarket said: Is that a lead clip I detect ? 🤣 Worse than that, a helicopter set-up and 3.5oz lead newmarket 1 Quote Link to comment Share on other sites More sharing options...
charlieg Posted April 6, 2022 Report Share Posted April 6, 2022 Definitely different to your usual approach Nick. I think Adam Penning did something of a similar theme with a stiff boom connected to a Multi-Chod section via a short braided section. By all accounts worked really well. salokcinnodrog 1 Quote Link to comment Share on other sites More sharing options...
salokcinnodrog Posted April 6, 2022 Author Report Share Posted April 6, 2022 2 minutes ago, charlieg said: Definitely different to your usual approach Nick. I think Adam Penning did something of a similar theme with a stiff boom connected to a Multi-Chod section via a short braided section. By all accounts worked really well. I'd tried Ronnie and Spinner rigs, D-rigs but felt I wasn't quite getting it right. The pop-up wasn't sitting high enough above the still growing weed on the 'patchy' areas, so had to play around and remembered I had this tied up so dug out the rig wallet. Puts faith back in the mind, especially as the first fish was perfectly nailed dead centre of the lip. I think John Claridge used something similar as well. Quote Link to comment Share on other sites More sharing options...
dalej2014 Posted April 6, 2022 Report Share Posted April 6, 2022 Bottom line (pun intended) - if it has a hook it can catch. Be interested to see how you get on with it. Quote Link to comment Share on other sites More sharing options...
salokcinnodrog Posted April 6, 2022 Author Report Share Posted April 6, 2022 55 minutes ago, dalej2014 said: Bottom line (pun intended) - if it has a hook it can catch. Be interested to see how you get on with it. Strangely enough, one of the guys who manages the syndicate has been comparing pics of stocked fish to my 23 this morning. We have come to the conclusion it is one of the rare 'Quarry' fish that rarely get banked, (don't think this one has been caught before) so it looks like the rig has confused it from the norm into making an error. barry211, dalej2014, snowmanstevo and 2 others 5 Quote Link to comment Share on other sites More sharing options...
framey Posted April 7, 2022 Report Share Posted April 7, 2022 Google mark Bryant Meccano rig it’s similar in make up crusian 1 Quote Link to comment Share on other sites More sharing options...
elmoputney Posted April 7, 2022 Report Share Posted April 7, 2022 1 hour ago, framey said: Google mark Bryant Meccano rig it’s similar in make up  framey and crusian 1 1 Quote Link to comment Share on other sites More sharing options...
salokcinnodrog Posted April 10, 2022 Author Report Share Posted April 10, 2022 On 07/04/2022 at 15:58, framey said: Google mark Bryant Meccano rig it’s similar in make up Only thing is my pop-up counterbalance is below the boom to minilink swivel.😉 Quote Link to comment Share on other sites More sharing options...
newmarket Posted May 5, 2022 Report Share Posted May 5, 2022 Question for you all . Multi-rig . Â why do you , and more importantly how would anybody want to , attach their bait with/on a micro swivel ? Quote Link to comment Share on other sites More sharing options...
snowmanstevo Posted May 5, 2022 Report Share Posted May 5, 2022 1 hour ago, newmarket said: Question for you all . Multi-rig .  why do you , and more importantly how would anybody want to , attach their bait with/on a micro swivel ? Bait screw for me 100% easy and less fiddling than bait floss when the old eyes and fingers start going 🙄🤣🤣 Bank Tackle do em cheap as chips the only thing make sure your pop up is super buoyant as the screw adds a tiny bit of extra weight to the rig. finchey 1 Quote Link to comment Share on other sites More sharing options...
... Posted May 5, 2022 Report Share Posted May 5, 2022 1 hour ago, snowmanstevo said: Bait screw for me 100% easy and less fiddling than bait floss when the old eyes and fingers start going 🙄🤣🤣 Bank Tackle do em cheap as chips the only thing make sure your pop up is super buoyant as the screw adds a tiny bit of extra weight to the rig. 100% screws every time... finchey and snowmanstevo 2 Quote Link to comment Share on other sites More sharing options...
newmarket Posted May 5, 2022 Report Share Posted May 5, 2022 Yes , thank you but the swivels ? what’s all that about ? Is the idea that the bait is flossed to the swivel or does the swivel get poked inside the hook bait ? Yes im that thick . And what do the people that do use them hope to achieve ? Do they think it gives the bait more movement or something ?  Quote Link to comment Share on other sites More sharing options...
snowmanstevo Posted May 5, 2022 Report Share Posted May 5, 2022 1 hour ago, newmarket said: Yes , thank you but the swivels ? what’s all that about ? Is the idea that the bait is flossed to the swivel or does the swivel get poked inside the hook bait ? Yes im that thick . And what do the people that do use them hope to achieve ? Do they think it gives the bait more movement or something ?  I’ve used swivels flossed on and pushed into bait I’m not sure about the movement bit tbh mate I use oval bait screws and they have never let me down tbh. In saying that I don’t think I fish many ‘riggy’ waters and try to concentrate on a nice sharp big hook and decent presentation Carpbell_ll 1 Quote Link to comment Share on other sites More sharing options...
newmarket Posted May 5, 2022 Report Share Posted May 5, 2022 46 minutes ago, snowmanstevo said: I’ve used swivels flossed on and pushed into bait I’m not sure about the movement bit tbh mate I use oval bait screws and they have never let me down tbh. In saying that I don’t think I fish many ‘riggy’ waters and try to concentrate on a nice sharp big hook and decent presentation Cheers Stevey , hope you’re well 😉 snowmanstevo 1 Quote Link to comment Share on other sites More sharing options...
snowmanstevo Posted May 5, 2022 Report Share Posted May 5, 2022 1 hour ago, newmarket said: Cheers Stevey , hope you’re well 😉 Backs shot to pieces but the strong painkillers have got me on cloud 9 🤣🤣😬😎 Quote Link to comment Share on other sites More sharing options...
crusian Posted May 10, 2022 Report Share Posted May 10, 2022 On 05/05/2022 at 14:46, newmarket said: Yes , thank you but the swivels ? what’s all that about ? Is the idea that the bait is flossed to the swivel or does the swivel get poked inside the hook bait ? Yes im that thick . And what do the people that do use them hope to achieve ? Do they think it gives the bait more movement or something ?  Thread the floss through the eye of the swivel , then put a Baiting Needle through the Boilie ; pull the floss back through the boilie burying the swivel barrel ( leaving the " bottom " swivel eye exposed , cut the excess floss then knot it and blob . Yes , I think it gives more movement . 😃  newmarket 1 Quote Link to comment Share on other sites More sharing options...
newmarket Posted May 11, 2022 Report Share Posted May 11, 2022 22 hours ago, crusian said: Thread the floss through the eye of the swivel , then put a Baiting Needle through the Boilie ; pull the floss back through the boilie burying the swivel barrel ( leaving the " bottom " swivel eye exposed , cut the excess floss then knot it and blob . Yes , I think it gives more movement . 😃  Interesting. Food for thought indeed Quote Link to comment Share on other sites More sharing options...
Carpbell_ll Posted May 15, 2022 Report Share Posted May 15, 2022 just knocked up a few multis using jelly wire from pb products, added a tiny bit of shrink tube on the eye to keep the D section nice and open in the right shape. got a 8 inch version for a bottom bait and a five inch rig for a pop up. Quote Link to comment Share on other sites More sharing options...
salokcinnodrog Posted May 15, 2022 Author Report Share Posted May 15, 2022 On 05/05/2022 at 10:50, newmarket said: Question for you all . Multi-rig . Â why do you , and more importantly how would anybody want to , attach their bait with/on a micro swivel ? I am a rig ring with a doubled length of dental floss or Kryston Samson hair braid pulled through the bait and lighter blobbed. I have tried micro swivels, but I think the extra weight cuts down movement by weighting down the tiny or trimmed down pop-up. That is a personal view. I have tried bait screws or black screw eye pins and found baits can soften up enough to pull off, especially if bird life is a pain... Â Â Quote Link to comment Share on other sites More sharing options...
Carpbell_ll Posted May 15, 2022 Report Share Posted May 15, 2022 i got tiny micro swivels on mine, chances are i will be using rig foam or rubber corn so the weight of the swivel shouldnt matter too much, i got them from gemini tackle also using their hook in a six. the business end ... 1 Quote Link to comment Share on other sites More sharing options...
elmoputney Posted June 18, 2022 Report Share Posted June 18, 2022 I've been thinking of making a variation on the multi rig for a while now, i wanted a stiff coated section hook end and after the knot supple and uncoated, I was planning to use shrink tube but due to being out in the garage couldn't be bothered to set up the stove so I tried a noodle kicker, I think for a bottom bait, wafter rig this will be quite good, i would use shrink tube for pop ups though looks OK I think, hook is a chod hammer, kickers are terminal tackle.uk (much better than the thinking anglers ones imo)Â Â Quote Link to comment Share on other sites More sharing options...
salokcinnodrog Posted June 18, 2022 Author Report Share Posted June 18, 2022 12 minutes ago, elmoputney said: I've been thinking of making a variation on the multi rig for a while now, i wanted a stiff coated section hook end and after the knot supple and uncoated, I was planning to use shrink tube but due to being out in the garage couldn't be bothered to set up the stove so I tried a noodle kicker, I think for a bottom bait, wafter rig this will be quite good, i would use shrink tube for pop ups though looks OK I think, hook is a chod hammer, kickers are terminal tackle.uk (much better than the thinking anglers ones imo)  Try that with a pop-up 😉 You want the hook sat on the kicker with the pop-up sitting nicely tight to the hookshank, so the hookbait lifts everything up vertical. elmoputney 1 Quote Link to comment Share on other sites More sharing options...
elmoputney Posted June 18, 2022 Report Share Posted June 18, 2022 38 minutes ago, salokcinnodrog said: Try that with a pop-up 😉 You want the hook sat on the kicker with the pop-up sitting nicely tight to the hookshank, so the hookbait lifts everything up vertical.  38 minutes ago, salokcinnodrog said: Try that with a pop-up 😉 You want the hook sat on the kicker with the pop-up sitting nicely tight to the hookshank, so the hookbait lifts everything up vertical. In my head I have been thinking about a withy pool type bend in the shrink tube for the pop up 💡 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.