Uroy Posted June 28, 2021 Report Share Posted June 28, 2021 Any good tips for splicing leadcore? I can do all the steps except pulling the last bit through. I’ve watched several YouTube videos and they just pull the last bit through so easy. Every time I try i break the needle ? Even when trying to gently tease it through. What am I missing? Does anyone know how to do it in an easier way lol. Cheers Quote Link to comment Share on other sites More sharing options...
jh92 Posted June 29, 2021 Report Share Posted June 29, 2021 Hi mate are you closing the gate on the needle before pulling it back through? I take it you are using a splicing needle? Uroy 1 Quote Link to comment Share on other sites More sharing options...
elmoputney Posted June 29, 2021 Report Share Posted June 29, 2021 The fox blue splicing needle is good, What leadcore are you using? And are you removing some of the leadcore, I don't use leadcore as it's banned most places I fish, but I use Gardner camflex unleaded, it splices like a dream 👍 Uroy 1 Quote Link to comment Share on other sites More sharing options...
Uroy Posted June 29, 2021 Author Report Share Posted June 29, 2021 Yeah I’m closing the gate and I’ve tried a few needles including the Korda one. For some reason I struggle with the last bit of pulling the leadcore through itself. I am removing the leadcore as well jh92 1 Quote Link to comment Share on other sites More sharing options...
Uroy Posted June 29, 2021 Author Report Share Posted June 29, 2021 I’ve tried a few branded and unbranded leadcores Quote Link to comment Share on other sites More sharing options...
jh92 Posted June 29, 2021 Report Share Posted June 29, 2021 (edited) 29 minutes ago, Uroy said: Yeah I’m closing the gate and I’ve tried a few needles including the Korda one. For some reason I struggle with the last bit of pulling the leadcore through itself. I am removing the leadcore as well I haven’t spliced leadcore for a years now so I’m racking my brains 😂 when you pull it back through, once it’s started try pushing the leadcore up the needle with one hand/2 fingers while using the other hand to pull the needle and leadcore through the spliced hole if that makes sense lol. My thinking is pushing it up the needle with bunch the leadcore up instead of straightening it out tight. Not sure if wetting the needle before pulling it through might help? 🤔 Edited June 29, 2021 by jh92 Quote Link to comment Share on other sites More sharing options...
elmoputney Posted June 29, 2021 Report Share Posted June 29, 2021 (edited) I dont think it usually needs yanking through tbh, I have developed a sort of technique where I almost shake it back through the splice hole I never wet mine either, Aren't you meant to splice the leadcore with the leadcore from that section removed? Much the same as a lead free leader Edited June 29, 2021 by elmoputney kevtaylor and jh92 2 Quote Link to comment Share on other sites More sharing options...
jh92 Posted June 29, 2021 Report Share Posted June 29, 2021 55 minutes ago, elmoputney said: I dont think it usually needs yanking through tbh, I have developed a sort of technique where I almost shake it back through the splice hole I never wet mine either, Aren't you meant to splice the leadcore with the leadcore from that section removed? Much the same as a lead free leader Yeah mate you need to remove the lead, for example say 7 inches, stick needle in where you broke the lead off, go up 3 inches, attach needle to the end of the leader and pull the end back through. So basically there’s no lead in the loop or the few inches where you spliced 👍👍 kevtaylor 1 Quote Link to comment Share on other sites More sharing options...
charlieg Posted June 29, 2021 Report Share Posted June 29, 2021 I have also found that not putting too much of the tag end in the gate of the splicing needle helps when pulling back through. Uroy and kevtaylor 2 Quote Link to comment Share on other sites More sharing options...
Pete Springate's Guns Posted June 29, 2021 Report Share Posted June 29, 2021 Instead of ‘pulling’ the needle through, try ‘pushing’ the leadcore off the needle. kevtaylor, Uroy, yonny and 1 other 4 Quote Link to comment Share on other sites More sharing options...
yonny Posted June 29, 2021 Report Share Posted June 29, 2021 18 minutes ago, Pete Springate's Guns said: Instead of ‘pulling’ the needle through, try ‘pushing’ the leadcore off the needle. This👆 You need to avoid stretching the material so pulling is your enemy👍 kevtaylor and Uroy 2 Quote Link to comment Share on other sites More sharing options...
greekskii Posted July 5, 2021 Report Share Posted July 5, 2021 have a look at the fox splicing tool, not a needle, just twisted wire. works a treat and could probably make yourself at home for a quid. Quote Link to comment Share on other sites More sharing options...
salokcinnodrog Posted July 9, 2021 Report Share Posted July 9, 2021 I used to use a darning needle rather than any tackle brand splicing needle. Haven't used lead core for a few years now though. Once I had spliced it I would go through the loop with the mainline and then Uni knot and only tighten and bed the knot down when it was properly formed and in place. The alternative is a needle knot through but I did find that unless the end of the leadcore had been lighter tagged with needle in place it would unfray and pull free. I refuse to use lead core now I don't think it is necessary or safe😉 Quote Link to comment Share on other sites More sharing options...
finchey Posted July 9, 2021 Report Share Posted July 9, 2021 1 hour ago, salokcinnodrog said: I refuse to use lead core now I don't think it is necessary or safe😉 Do you use tubing or do you just go naked straight through?😁👍 Quote Link to comment Share on other sites More sharing options...
salokcinnodrog Posted July 9, 2021 Report Share Posted July 9, 2021 1 hour ago, finchey said: Do you use tubing or do you just go naked straight through?😁👍 Either, even both. Often one on each. finchey 1 Quote Link to comment Share on other sites More sharing options...
Carpbell_ll Posted July 9, 2021 Report Share Posted July 9, 2021 i haven't used a leader in years always straight through all the talk of hard on the deck with lead core is no more hard on the deck than nylon line. salokcinnodrog and finchey 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.