yonny

I don't know anything for a fact but I do have an assumption fella - that being that Atomic hooks are harder than other brands. I've sharpened my hooks for years and when I fist started using Atomic I found they took at least twice as long to sharpen which for me has to indicate higher hardness. As I mentioned previously high hardness is not always a good thing as it can lead to embrittlement, but I find Atomic are heat treated right in the sweet spot - hard as nails yet tough as old boots. You are essentially performing a simple tensile test there. I wish I could give you some kind of equation or statistic that would tell us if your result is any good or not but alas, I cannot. It sounds quite low to me (based on similar tests I perform on similar components at work (although my testing is in compression rather than tensile)). Unfortunately I've never tested anything with such a thin gauge so I really cannot give you an answer of any value..... What is interesting is that you obtained a higher result with the size 8 fly hook than you did with the size 4 Krank (which clearly has a thicker gauge). This would suggest that either the fly hook result is very good or the Krank result is poo. Do you know, the second hardest hooks I've ever sharpened are the Gamakatsus...... I found you can sharpen Korda's by having a kitten lick them....

Afraid not bud, that would temper the steel which will reduce core hardness and hence the hooks strength.

They're just not strong enough for my liking bud. That said, I'm a Nene Valley chap so have to deal with serious weed on most waters. Dude - My experience, as QA Manager for a manufacturer of heat treated carbon steel fasteners (the same process used to make hooks) for the automotive industry, tells me it's a fact that if the yield point is exceeded even once, you've weakened the hook significantly - spring rate is compromised so the hook cannot absorb shock as intended. Therefore when stresses on the hook reach a certain level the hook WILL bend rather than flex - it's just a question of whether those stress levels will be reached while the fish is being landed. I'm not saying you can't land fish on modified hooks (as you say, plenty have been landed), just that IMO it's not worth the risk - it's asking for trouble fella.

Not a good idea fella - You'll exceed it's yield point which will weaken it. Personally I wouldn't go near a fly hook for carp.

Can't say I'll write off all Korda gear but I'll certainly avoid the hooks. I've already written off Nash, Fox, Drennan/ESP.... I'm running out of options. TBH Atomic hooks are all I use anyway nowadays - they've never let me down.

The vast majority of hooks come from China but it's a myth that all Chinese manufacturers are bad fella. Some are very. very good indeed. The problems start when the tackle brands try to cut costs by using the cheaper manufacturers (which are the guys you're referring to). It winds me up - it's fair enough that the tackle brands want to increase their margin, that's standard business practise, but if they choose to go down that route than they should have a robust inspection of product when it gets to Europe. It's clear that in many cases they don't do any testing whatsoever - they just take it for granted that the hooks are sound and then come out with their "you'll always get a bad batch" rollocks when they fail in the field. In those cases you have to blame the tackle firm as much as the manufacturer, or more so in my mind.

Sounds to me like there's an issue with consistency with these Kranks. One fella says they're flexible which is actually a good thing - they're heat treated high carbon steel (same stuff knife blades are made out of) so they have a high spring rate which allows them to flex slightly so they can absorb stress and maintain there original shape. Another fella says they bend which means his batch was too soft (i.e. spring rate was too low and the material yielded). Another fella said they snap meaning his batch was too hard hence they were brittle. You hear folks giving it "you'll always have a bad batch from time to time". I can tell you now that's absolute rubbish. If the manufacturer has control of their process you shouldn't get any issues like that. Therefore if I see a single hook fail I'll avoid that manufacturer altogether - no second chances.

Horror stories starting to emerge on other forums. Apparently the pin that holds the lid on is prone to walking out of the hole. There's been lots of reports of them failing. Fox have actually acknowledged a problem of FB: "our guess would be that the pin on the hinge has worked its way loose through not being flared enough this is the only issue we have seen with the hinge since the product was released, the hinge was bomb proof in testing, it just appears a small percentage of the tens of thousands we have made have not been flared quite enough by the pneumatic press". Worrying.....

Mine arrived yesterday. It looks good but I aint used it yet.... Basically my fist impression is that they've fixed all the problems I saw with the Spomb. Can't ask for much more than that. Looks well built but looks don't always tell the full story.

Disagree. That may be the point of the rig for less experienced anglers (the chuck-it-out-and-have-a-beer brigade) . For those that are experienced, the point of the rig is to fish spots that cannot be fished effectively with more conventional rigs. It can be used to chuck at fish showing over an area of unknown bottom but that is a secondary purpose. I would never dream of putting a choddy on a clear area.

If it's not clean on the deck then whack a split shot an inch or two under the hook on the rig you're already using. Comments above are correct, what you're doing already will catch carp from any water. Job done.

£5 for 3 zigs is VERY pricey! You can get 100m of Drennan double strength for £5. That will make 33 10ft zigs.

Lets try again..... I used this rig in 2012 thinking I had invented it. I called it the anti-eject chod. I caught my first UK 40 on it so immediately thought it was the best rig ever. Over the course of the season however it didn't outfish the other rigs I was using. I use a much less complicated version now although still quite different to the standard chod. I remember seeing that rig on the Korda website shortly after I had though of it and was well gutted my "secret" was out!!

I used this rig in 2012 thinking