salokcinnodrog

Well you can get at least 2 tins of sweetcorn into a kilo of Vitalin Also many mixed particles, pigeon conditioner, Red Band, Hemp. Half fill a 10kilo base mix bucket with Vitalin, a few pellets and then add a couple of kilos of prepped particles complete with juice, maybe even some CSL liquid or Molasses. As you say, a little spare groundbait in case you do over do it, but I do have a tendency to check it as I mix the whole lot in, and usually still end up with a "dry patch" of groundbait in the base/side wall join would you recommend groundbait used with vitalin as i tend to stay away from groundbait as it attracts the andys like locusts ? would the liquid leake out of the mesh during the cast unlike the bag sorry for any typos ive been in the pub for the last 5 hours lol I used to use loads of Vitalin with particles and pellets on the reservoir. I knew that bream were going to be attracted to it, but sometimes I piled it in and caught carp over the top instantly, and sometimes it was bream. You could also be catching slab after slab, and then get a pick up exactly the same to find a carp on the end. You could also have the occasional blank, but the attraction remained for a while as it almost "flavoured" the lakebed. Come to that, mix it stiff enough and you can even fish it "method style". Groundbait moulded around the lead, and no need for PVA

Well you can get at least 2 tins of sweetcorn into a kilo of Vitalin Also many mixed particles, pigeon conditioner, Red Band, Hemp. Half fill a 10kilo base mix bucket with Vitalin, a few pellets and then add a couple of kilos of prepped particles complete with juice, maybe even some CSL liquid or Molasses. As you say, a little spare groundbait in case you do over do it, but I do have a tendency to check it as I mix the whole lot in, and usually still end up with a "dry patch" of groundbait in the base/side wall join

You would be very surprised at how much water/particle juice groundbait will absorb before it starts to melt PVA. Salt, NOT needed in baits http://www.carp.com/carp-forum/viewtopic.php?t=53682&highlight=salt http://www.carp.com/carp-forum/viewtopic.php?t=48683&highlight=salt Those should cover the Salt question as well as groundbait and putting wet particles in bags

' Are thse any use? http://www.carp.com/carp-forum/viewtopic.php?t=27183http://www.carp.com/carp-forum/viewtopic.php?t=32920&postdays=0&postorder=asc&start=0 I sometimes use whole boilies in boilie sized mesh, and attach one to the hair after making the "bag" up. The other end is overhand knotted to the mainline near the lead. You can make up a groundbait stick, and I think that the groundbait stick will cover the hooklink even if you tie the mesh onto the lead/mainline swivel and the hook. Just push the hook through the end of the mesh next to the knot (avoiding going through the knot as it takes longer to dissolve). Be aware though a big PVA bag or mesh can weigh a fair bit, so you could be overloading your rods

Copied and pasted http://www.carp.com/carp-forum/viewtopic.php?p=571878#571878

I know that Rib Valley now have a website up and running, along with all their contact details. It may have changed from when I originally posted about the venue: http://www.ribvalleyfishinglakes.co.uk/Home

Simples Try this, it may help: Carp.com Guide to the Knotless Knot and Basic Rigs

i dont follow you??? may be someone that HASN'T had a brain tumor removed by a surgeon that just got back from a holiday in Dublin can understand........but i dont. some thing to think about......a lead tied on to the mainline then hooklink tied to the lead, fixed lead.( death rig ) would be fine while its still connected to the rod....its when its NOT connected and left live in the water that it kills Your not following me right I mean a swivel tied to the end of the mainline then a weaker mono link tied to that swivel then the lead tied to the weaker mono. The hook link is still running on the mainline so no need for starky comments lol I got what you meant, hence my reply. I know you were aiming your comments at Beanz, but I think he has the same misgivings as I do If the hooklink is running on the mainline, and a swivel at the bottom, there is not enough weight to pull the rig free off the top end of the line. If the hooklink is in the "middle" of that broken, cracked off line, how does it pull free? It would take one end snagging up for the rig to be able to be ejected, yet if the line has twisted around itself then that may not be able to happen. It amazes me how little effort it takes for line to knot around itself, an almost untieable knot with loops hanging around it, yet those loops may also be enough to trap the line on a snag. That means the fish is now not only trailing the line, but is potentially tethered. Yet if the lead was attached, then the rig would previously have been pulled free as the lead dragged behind.

I try to keep it as simple as possible with my pop-up rigs on pendant or inline leads. I don't think that on most occasions a pop-up rig is actually sucked in at all, I think most pop-up baits are picked up, so with that in mind I keep the bait as tight as I can to the hookshank. A "standard" hooklink, with at least part of it being supple (and braided), or hinged. My "lazy" method is to tie a uni knot loop at the end of the hooklink, put the pop-up in, pull loop tight, and then attach hook by the knotless knot with the bait tight to the shank, maybe a small piece of silicon holding it in place. I also prefer "overweighting" the pop-up so that there is no way that it can be wafted about and risk foul hooking, although critically balancing it with only just enough weight to sink it can help at times. Other than that, I do sometimes use a D-rig

I don't think that fishing a weak link will increase the safety for fish! It will mean that should the lead be ejected, the rig is not "pulled off" the leader or mainline, and the fish will be trailing 2 lengths of line attached to the rig, with the rig in the middle, until one end is snagged up and pulls the hooklink free of the other. Strangely enough the comment about a lead whacking across the carp's head is pertinent though, and another reason for me not using helicopter set-ups unless I absolutely have to, which is usually long distance, and not as a Chod set-up. At range fishing the lead is going to be in front of the fish; the fish will be coming towards you or scrapping side to side, so the lead is not whacking the fish. However when the fish is going away from you in the fight it is possibly going to cause damage.

Years ago long before "Chods" were the fashionable name for Silt rigs I came up with a set-up that works with the beads fixed on a piece of sliding tubing. The whole length of tubing is able to slide up the line, so that the bait and hooklink settles on top of the silt, yet when you play a fish, it will slide down to the lead. I actually worry about a set-up where the lead is trailing a long way behind the fish if the rig is fixed say 30centimetres up the line, and I also don't think that it is best fished with a slack line. My reason for this is that at times the fish can easily eject (any) the hook/rig set up. If the line is slack you may not know that you have been done, whereas with a tight line you should at least get a bleep or 2 when you get done, and can deal with it.

Welcome to Carp.com Try these people: http://www.visitleevalley.org.uk/go/fisheries/

Aye, I am Have a read of this link , maybe some other interesting links in the linked thread as well

Part of your comment is one reason I don't like Helicopter set-ups, especially with a "naked" line section of light breaking strain mainline. You should be using a line strength of at least 15lb to my mind. Have a read of these, some good pics and ideas here: http://www.carp.com/carp-forum/viewtopic.php?t=51296 http://www.carp.com/carp-forum/viewtopic.php?t=36456 http://www.carp.com/carp-forum/viewtopic.php?p=519408#519408 http://www.carp.com/carp-forum/viewtopic.php?t=37603 Thanks for your patience. That last thread had a brilliant picture in it and would be my preferred set up. The only thing is, if the beads can release then how do you prevent them sliding down the line on the cast or when playing a fish? This is probably obvious but not to me I currently use Daiwa sensor brown 15lb. I don't want to use a leader so should I go for a higher breaking strain line? The new lake I am fishing has some nice twenties and probably thirties too by now. What size beads should I use and which of the two sizes of sinker? The beads I used on that set-up were 8mm Rubber beads. A small PVA string loop or foam nugget will stop the beads sliding down on the cast, but it honestly doesn't matter that much, as you want them to slide up the line on impact with the water, so that the rig itself settles on the silt. As for playing fish, it doesn't matter if they slide down to the lead attachment, in fact it is more likely to help avoid the trailing lead getting snagged or stuck in anything. I've landed a fair number of fish to over 30lb on 15lb Daiwa Sensor, its a pretty good line, and years ago I did use it with Helicopter set-ups.

Part of your comment is one reason I don't like Helicopter set-ups, especially with a "naked" line section of light breaking strain mainline. You should be using a line strength of at least 15lb to my mind. Have a read of these, some good pics and ideas here: http://www.carp.com/carp-forum/viewtopic.php?t=51296 http://www.carp.com/carp-forum/viewtopic.php?t=36456 http://www.carp.com/carp-forum/viewtopic.php?p=519408#519408 http://www.carp.com/carp-forum/viewtopic.php?t=37603

If you include Combi rigs, braid to stiff section, then yes, for a lot of years

Not quite. I already had confidence in Carp-R-Us patterns, always had some in the tackle box, but also had some ESP patterns. Then when this article was published and accused me of being an armchair angler with nothing better to do than "argue" over something as trivial as leadcore, and not actually fishing, in fact the response almost totally avoided the actual opinion about leadcore, I decided to boycott ESP. Please also note, this was not the Keith Moors "Against Leadcore" piece, but the other anglers response.

Having tried Keiths test many times over the years, some intentionally and some not so those slack lines really do make a difference. Attempting to cut through the water is a whole lot harder than pulling through it. If you think of a tight line in water, and what happens on a take, the line is cutting through the water at any angle. You will only get any indication if the fish is actually able to move the lead any distance, but there is pressure holding the line in place, and again it would be cutting through the water Now with this running lead and slack line you have the line under no tension. On a take the run ring allows the line free passage, it slides through the run ring, the line is not cutting through the water, it pulls through this tube. I went back to run rings again, as even though you have your set-up shown with a running lead, I'm not 100% sure of the true effects of an inline running lead. I think that on most occasions that they actually dive into the lakebed, and go "nose down". Now on most lakebeds, there is always likely to be sediment build-up and as the lead lands it will put its nose at the very least into this sediment. Come to that, over time the lead may start to sink into the silt. Or even the nose just dinks into the gravel, clay or sand; This would prevent the lead being free running. Now with a run ring, again a lead may pull the whole lot into sediment (no arguments, it will happen), but as we tend to fish the least silty areas , is less likely to be buried; for those who do actively fish in silt and sediment, the simple addition of a lead link (curse and darn it, possibly made of leadcore), will keep the run ring and end tackle above it.

I used to have great faith in Carp-R-Us Centurions and Nailers, but found them difficult to get hold of. I used to use ESP hooks, and again, one hook landed plenty of fish with no resharpening, including fish to over 26lb, but after a "dispute" (over Leadcore of all things) with a well known angler and his views and what he wrote in a magazine, I started boycotting ESP products. I started using Covert Muggas over a year ago, and have yet to lose a fish on them (although I have lost fish in that time on other patterns). In that time I have landed a lot of fish, to over 30lb at ranges from the margins up to 100metres, so I have played fish under plenty of pressure. I don't worry about sharpening hooks, I test them out the packet, and if they are sharp enough they get used.

That's a bit close to the truth. My grandfather came over from Russia at the turn of the last century

Gary, I honestly think we "overthink" situations sometimes. I much prefer the run ring pendant set-up of running leads. I don't think that inline running leads behave at all as we think that they do. You need a heavier lead to have the free movement of the line through the lead, and you have to hope that the lead is not nose down and trapping any line, which unless you place the lead by hand you can't guarantee. In my case I accept the reduction of sensitivity with a length of tubing and the run ring on that, but again, with the heavier lead (3oz in my case), I think that the lead holds bottom well, yet light leads obviously do work as Moorsey has proved time and time again. Under this little lot is a couple of rigs, complete with tubing and running leads. These were taken from directly above the rigs, even with normal rubbish on the bottom in what is actually quite clear water, it is reasonably difficult to pick out lead, line, run ring and hooklink. It is the hookbaits that are the most visible and easily distinguished.

Fly fishing hook, for trout I think, probably not strong enough for Salmon Fishing in smaller sizes

Is this any use? http://www.carp.com/carp-forum/viewtopic.php?t=39298&highlight=rig+mechanics I think the only change I have affected in my fishing since then has been my change to an inturned pattern for pop-ups, like Kamasan B175's. The rig I worked out then, is still pretty much my standard rig on that water, and its still catching

Black and clear Amnesia worked for me, even the green when I could get it. I used the loop knot at the swivel end, 3 turn blood knot the hook on and then tie a bait floss or whipping thread hair down the shank from the eye. I did try it with a knotless knot from the Amnesia itself, but found it a little stiff and got a few hookpulls doing that.