daleg2008 Posted June 10, 2009 Report Posted June 10, 2009 what do you guys use to hold the hair in place on the hook? for a while now i have used a fine bore silicone tubing, but everytime i catch a carp it splits which means tying up a new rig or using a spare one. its becoming a bit annoying now. my mate said rig tubing but i find that a bit to bulky and slips too easily. any advice would be helpfull cheers. Quote
noknot Posted June 10, 2009 Report Posted June 10, 2009 Not being funny, but try some fresh stock of silicone tube, thats if you really need tube on your hooks? Quote
icemaster Posted June 10, 2009 Report Posted June 10, 2009 You could alway use a small rig ring. Quote
paulmlpss Posted June 10, 2009 Report Posted June 10, 2009 I dont use tubing i tie a knot in the hair but tie it to the shank of the hook at the same time. This creates sort of a blowback rig and when i catch a fish the knot it pushed up against the knotless knot. All i do then is gently ease it lose with my baiting needle and then slide knot back down shank. Quote
daleg2008 Posted June 10, 2009 Author Report Posted June 10, 2009 Not being funny, but try some fresh stock of silicone tube, thats if you really need tube on your hooks? i dont think you understand what tubing i mean. its 0.5mm thick and yes i do Quote
daleg2008 Posted June 10, 2009 Author Report Posted June 10, 2009 No thanks not interested in blowback style, must be a type of tubing. small bore but quite thick! i suppose a hookbead could work!? Quote
nash_gadgeteer Posted June 10, 2009 Report Posted June 10, 2009 Check out Aquabourn Rubberix, it is a complete alternative to sleeving... Quote
paulmlpss Posted June 10, 2009 Report Posted June 10, 2009 No thanks not interested in blowback style, must be a type of tubing. small bore but quite thick! i suppose a hookbead could work!? I dont do it just for the blowback style i only really do it so it keeps the hair coming off the bend but without the extra weight of tubing. Quote
vinyljunkie Posted June 10, 2009 Report Posted June 10, 2009 Check out Aquabourn Rubberix, it is a complete alternative to sleeving... shhhhh the stuff is too good to share Quote
noknot Posted June 10, 2009 Report Posted June 10, 2009 Not being funny, but try some fresh stock of silicone tube, thats if you really need tube on your hooks? i dont think you understand what tubing i mean. its 0.5mm thick and yes i do Well if thats your attitude, get on with it, and good luck! Quote
salokcinnodrog Posted June 10, 2009 Report Posted June 10, 2009 what do you guys use to hold the hair in place on the hook? for a while now i have used a fine bore silicone tubing, but everytime i catch a carp it splits which means tying up a new rig or using a spare one. its becoming a bit annoying now. my mate said rig tubing but i find that a bit to bulky and slips too easily. any advice would be helpfull cheers. Why not use enough Shrink tubing to go down the shank to hold the hair in place. Perfect when you have the hair coming off opposite the point. As for using Silicon tube, different silicon, different behaviour. If the stuff you gets splits, then use one that doesn't And why does it entail tying a new rig if it does split? Thread the tiny piece of tubing onto baiting needle, pull hair through tubing, and then thread over point being careful NOT to catch fibres if you use a braid hair. Simples! Quote
daleg2008 Posted June 11, 2009 Author Report Posted June 11, 2009 Its the fine stuff from korda so cant be re-threaded. ill have a look to see what shrink tube i have. cheers Nick and everyone else. Quote
daleg2008 Posted June 11, 2009 Author Report Posted June 11, 2009 No thanks not interested in blowback style, must be a type of tubing. small bore but quite thick! i suppose a hookbead could work!? I dont do it just for the blowback style i only really do it so it keeps the hair coming off the bend but without the extra weight of tubing. Its a good idea mate, but not for me. i like that extra weight on the hook and it stops the hair tangling, i dont mean just on the cast either. thanks anyway i might even encounter a time when i need to use it. Quote
Guest fenboy Posted June 11, 2009 Report Posted June 11, 2009 Never felt the need for tubing on the hook ,I just use a curved pattern and either tread a bag on the link or tie the hair to the hook with pva tape ,no tube means better seperation of the bait and hook which = better hook holds imo Quote
bluebirdjones Posted June 11, 2009 Report Posted June 11, 2009 I bought a pack of silicon but can't remember which one I had I think its this one. ATOMIC Rockbottom Silicone Hook/Rig Sleeving http://www.englandangling.co.uk/displayProduct.asp?prodCode=atoRS 10 x 50mm lengths per pack, 0.75mm bore P.V.C. Tubing that when placed on hook will hold hair tight to the desired position. Will not move during casting, so allowing perfect presentation every time. I used to use normal rig tubing which split all the time then a mate put me onto this stuff. It still splits but very rarely, there seems to be a lot more flexibility in this tube. Hope this helps Quote
salokcinnodrog Posted June 11, 2009 Report Posted June 11, 2009 Its the fine stuff from korda so cant be re-threaded. ill have a look to see what shrink tube i have. cheers Nick and everyone else.I shall not put down the wicked thoughts I have about the brand then Quote
daleg2008 Posted June 11, 2009 Author Report Posted June 11, 2009 I bought a pack of silicon but can't remember which one I had I think its this one. ATOMIC Rockbottom Silicone Hook/Rig Sleeving http://www.englandangling.co.uk/displayProduct.asp?prodCode=atoRS 10 x 50mm lengths per pack, 0.75mm bore P.V.C. Tubing that when placed on hook will hold hair tight to the desired position. Will not move during casting, so allowing perfect presentation every time. I used to use normal rig tubing which split all the time then a mate put me onto this stuff. It still splits but very rarely, there seems to be a lot more flexibility in this tube. Hope this helps Massive help nice one Quote
daleg2008 Posted June 11, 2009 Author Report Posted June 11, 2009 Its the fine stuff from korda so cant be re-threaded. ill have a look to see what shrink tube i have. cheers Nick and everyone else.I shall not put down the wicked thoughts I have about the brand then lol i dont have a prefered brand i just buy what i need. i must admit their rig tubing is awful, esp anchor all the way. Quote
whiteymoza Posted December 23, 2009 Report Posted December 23, 2009 I used the horrible korda tubing in place of silicone on the hook, works a treat and its the only thing I use the stuff for. Quote
maplex909 Posted December 23, 2009 Report Posted December 23, 2009 Only a idea, as i used it on a few of my rig's but never caught anything over 20+ on them .. but worth a try. artificial maggots? Using a baiting needle from head to tail coming from the top of the rig (swivle end) thead this down on to the hook. Depending on the size of the hook. the maggot should cover most of the braid, and you hair should start right from the bottom of the shank. Quote
iberiancarpa Posted December 28, 2009 Report Posted December 28, 2009 Electricians use shrink tubing to cover cables. I brought 10 meters of it off of a well known auction site, for less then a couple of packs of the branded stuff. Works well and comes in different diameters. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.