yonny

Geez I too think leading around scares carp but you should still go with the intention of catching them. It only takes one carp to come swimming along 5 mins after you've finished messing about to end up with a fish in the net. I've caught loads of carp very shortly after frothing the water to a foam. As long as the rig is presented there's ALWAYS a chance mate.

Wading is the easiest way to find spots IMO. You'll often find me wandering up and down the margins poking around with my weigh crook. Certainly sounds like a crazy session and seems you'll have gained some good info. Now you just have to put it to good use!

Here's a question: Is it possible to over-balance a bait? If a bait takes a minute to settle could that not render the rig ineffective under turbulence? With a couple of bigguns swimming around the hookbait could the disturbance in the water send it flapping around all over the place rather than sitting patiently on the deck? We've all seen light food items (hemp for e.g.) being kicked up during heavy feeding activity, could the same happen to a bait balanced so well it's almost weightless? Not saying it will, just after opinions.....

Honestly, I don't think it matters that much. newmarket is spot-on, each wafter is different. As long as the hook is at least partially on the deck it's fine for me. I'd probably prefer the eye to be lifted slightly but wont start messing around if it's sitting flat. The critical bit for me is that that hookbait is lighter than the freebies, which it will be assuming the wafter is a half decent one..... At the end of the day we've all caught loads of carp on bottom baits straight out of the bag so I prefer to concentrate more on where I'm putting the bait rather than worry about a couple of millimeters here or there off the deck.

You know the score fella. It's not uncommon to hit a new water and struggle early doors, I'd go so far as to say it's normal. I actually think that's an important part of the story on any given water - it's supposed to be difficult, that's why we do it. All those blanks are time spent learning. At some point all those things you've learned will come together and you'll have a fish in the net.... and the longer the initial struggle goes on the better you'll feel when that happens. First fish from a tricky venue is always a massive buzz - happiness, achievement and relief all rolled into one. You can also rest safe in the knowledge that once you've caught one, more WILL follow - because if you know what has caught before you know what can catch again...... Looking forward to the next update.

Exactly what I thought when I got mine. I remember seeing a comment on a forum when I was researching them - some guy said his vision was clearer/sharper with them on than it was without them - I thought what a load of you-know-what, but, when I got them, I could see what he meant. They're just brilliant....

No idea bud but I do remember seeing recommendations on forums when I was researching the Costas. A quick Google should give you some ideas - check the fluff chucking forums.

You wont regret it bud.

I've been through all the cheaper brands (and a couple of the more expensive ones) over the years and last year took the plunge and bought some Costa Del Mar 580G's. They're not just a bit better than the others, they're a million miles ahead IMO. Not cheap, but defo the most effective. Even the plastic lens ones (580P) were better than anything else I've tried, but the 580G's (glass lenses) are on a completely different level. If you truly aren't bothered about cost go and find a stockist and try them - I almost guarantee you'll but them on the spot. They're made for angling where most of the other top end brands are not. p.s. the lifetime warranty makes the cost a little easier to swallow.

Call it what you want fella. It's fished up the leader, like a chod, but constructed like a HSR.

I get round this by either fishing the chod on a short boom (like a short HSR) or tying a stop knot between the hooklink and the lead.

Hmmmm I've avoided this discussion on this and other forums as I'm on the fence. I don't use them myself for the reason you state but the more I think about it the less I'm averse to their use. IMO the safest rig is the one that lands the fish safely and I do believe the system will give you a better chance of that. If you get snapped off the line will no longer be tight therefore the leadcore could still fall under its own weight and become snagged allowing the fish to escape. Like I say, not entirely convinced either way so will continue to avoid for the time being.

You do not want to know mate. Check the group page on FB - It's closed but you should be accepted. It's all on there, warts and all. Nightmare.....

Brilliant Next up - a new bivvy lol

The Specialised Hookbaits are lovely but don't expect them to catch you carp from spots that other baits won't. None of those fancy baits will do that fella. If I was you I'd go in with any old half decent (but cheap) bait, put it about a bit, and work out the areas the carp are happy to feed. Once you've done that it's time to start chucking the good (i.e. expensive) stuff in to really get them going. Bait is just one part of the jigsaw. IMO (and I know some will disagree) it plays a lesser part than we carpers traditionally thought. I truly believe if you have feeding fish in front of you almost any half decent bait will work. It sounds to me like it's the rest of the jigsaw you should be concentrating on at this point. Your priority should be finding the areas from which they are catchable. The most expensive bait in the world wont catch owt if it's in the wrong spot bud.

The Simon Scott article was available on the old baitworks website. I can't see it on the new one.

My problem is I've developed a phobia of using anything else once I've found a hook that works for me. Last year I dabbled with Nash hooks in the spring and lost a couple fish - in the bin they went and back onto the Atomics (no idea why I changed in the first place tbh, just liked the look of the chod twisters for HSRs). I only chucked one more rig out all year without an Atomic hook attached - it was a multi rig with Drennan Conti on (again, no idea why I changed, I was just tinkering for the sake of it....idiot) - had a run and proceeded to lose an upper 30 common at the net to a hook pull. Would have been a PB common..... Therefore I simply don't dare try these new ESP hooks unless everyone and their mum starts raving about them when they're released. I really like the look of them, just too scared to try them. As the old saying goes - If it aint broke, don't fix it....

http://esp-carpgear.com/news/e-s-p-cryogen-a-hook-revolution/ I've heard of the treatment used to harden these and believe it's the first time it has been used for hooks - if it's done well these could be a genuine step forward. It'll be interesting to hear feedback when they're released.

There's a lesson to be learned right there bud - If you've had what you believe to be inquiries on a given spot and you're not 100% sure what the bottom's like, always find out at the end of the session. All it takes is a couple of casts with a bare lead - and you're one up in preparation for your next sesh! I'd say I do more marking at the end of sessions than I do at the start. I agree that on 'proper' waters marking up can spook the carp - therefore if I can get a drop and I know I'm on fish it's good enough for me - but I never walk away without having a quick chuck to determine the substrate.

When you put it like that I suppose I check every hook too. Not sure that's an effective test fella, you have no defined pass/fail criteria. A hook that passes may fail once you've had your weetabix....

You mean you test every single hook? Or you test a given brand/pattern prior to using? How do you test them fella?

We cannot say for a fact that the Korda's are softer fella - all we can say is that nealjt's test result and my findings re sharpening are indicative of a hook that is softer than some other brands. If they're softer then yes, they would blunt more easily, it is a given. So you should be mate! It's the single most important consumable item in our tackle box.

I don't know anything for a fact but I do have an assumption fella - that being that Atomic hooks are harder than other brands. I've sharpened my hooks for years and when I fist started using Atomic I found they took at least twice as long to sharpen which for me has to indicate higher hardness. As I mentioned previously high hardness is not always a good thing as it can lead to embrittlement, but I find Atomic are heat treated right in the sweet spot - hard as nails yet tough as old boots. You are essentially performing a simple tensile test there. I wish I could give you some kind of equation or statistic that would tell us if your result is any good or not but alas, I cannot. It sounds quite low to me (based on similar tests I perform on similar components at work (although my testing is in compression rather than tensile)). Unfortunately I've never tested anything with such a thin gauge so I really cannot give you an answer of any value..... What is interesting is that you obtained a higher result with the size 8 fly hook than you did with the size 4 Krank (which clearly has a thicker gauge). This would suggest that either the fly hook result is very good or the Krank result is poo. Do you know, the second hardest hooks I've ever sharpened are the Gamakatsus...... I found you can sharpen Korda's by having a kitten lick them....

Afraid not bud, that would temper the steel which will reduce core hardness and hence the hooks strength.

They're just not strong enough for my liking bud. That said, I'm a Nene Valley chap so have to deal with serious weed on most waters. Dude - My experience, as QA Manager for a manufacturer of heat treated carbon steel fasteners (the same process used to make hooks) for the automotive industry, tells me it's a fact that if the yield point is exceeded even once, you've weakened the hook significantly - spring rate is compromised so the hook cannot absorb shock as intended. Therefore when stresses on the hook reach a certain level the hook WILL bend rather than flex - it's just a question of whether those stress levels will be reached while the fish is being landed. I'm not saying you can't land fish on modified hooks (as you say, plenty have been landed), just that IMO it's not worth the risk - it's asking for trouble fella.