elmoputney Posted March 25, 2020 Report Share Posted March 25, 2020 I don't need one but I think they look lovely In these dark times I feel like treating myself, anyone got one? Quote Link to comment Share on other sites More sharing options...
elmoputney Posted March 25, 2020 Author Report Share Posted March 25, 2020 I decided against it and bought some ngt screw in banksticks The skinflint way to make a single pod set up 😁 I have loads of other stainless bits so have options now Quote Link to comment Share on other sites More sharing options...
framey Posted March 25, 2020 Report Share Posted March 25, 2020 27 minutes ago, elmoputney said: I decided against it and bought some ngt screw in banksticks The skinflint way to make a single pod set up 😁 I have loads of other stainless bits so have options now Have a look at the wychwood web site they do a set of poles to turn a bank stick set up into a pod set up for 35£ Quote Link to comment Share on other sites More sharing options...
elmoputney Posted March 25, 2020 Author Report Share Posted March 25, 2020 24 minutes ago, framey said: Have a look at the wychwood web site they do a set of poles to turn a bank stick set up into a pod set up for 35£ That looks a good idea, I do quite like the look of the wychwood buzz bars and banksticks too they have some nice features like the bobbin thread hole and the fact you can use them as a goal post or single bankstick set up, maybe once I get bored with the stainless I Will have a look 😁 Quote Link to comment Share on other sites More sharing options...
... Posted March 25, 2020 Report Share Posted March 25, 2020 Have look at the Proligic K1 too 👍 Quote Link to comment Share on other sites More sharing options...
framey Posted March 25, 2020 Report Share Posted March 25, 2020 44 minutes ago, elmoputney said: That looks a good idea, I do quite like the look of the wychwood buzz bars and banksticks too they have some nice features like the bobbin thread hole and the fact you can use them as a goal post or single bankstick set up, maybe once I get bored with the stainless I Will have a look 😁 I’m using the buzz bars elmoputney 1 Quote Link to comment Share on other sites More sharing options...
elmoputney Posted March 29, 2020 Author Report Share Posted March 29, 2020 My stainless bits arrived yesterday while I remembered how stinky winky the quality is just set them up in tip run required corner, I don't think I will like them for long as my buzz bar bag now weighs more than my bed 😁 but quite happy with the rake on the set up and they seemed sturdy enough time will tell but will probably end up wanting to buy some quality items eventually 😅 B B 1 Quote Link to comment Share on other sites More sharing options...
... Posted March 29, 2020 Report Share Posted March 29, 2020 18 minutes ago, elmoputney said: My stainless bits arrived yesterday while I remembered how stinky winky the quality is just set them up in tip run required corner, I don't think I will like them for long as my buzz bar bag now weighs more than my bed 😁 but quite happy with the rake on the set up and they seemed sturdy enough time will tell but will probably end up wanting to buy some quality items eventually 😅 NGT singles ?? Quote Link to comment Share on other sites More sharing options...
elmoputney Posted March 29, 2020 Author Report Share Posted March 29, 2020 6 minutes ago, Highy said: NGT singles ?? Kind of slight variation on the Std ones you can get,as I am using a goalpost front bar and a narrow buzz bar rear and other bits I had, the quality isn't all that I don't think really needs a proper tap and die cutter set running over them to make them better, the threads are a bit poo on them. Probably good 10 ten yarders but I just know they will annoy me 😁 Quote Link to comment Share on other sites More sharing options...
... Posted March 29, 2020 Report Share Posted March 29, 2020 1 hour ago, elmoputney said: Kind of slight variation on the Std ones you can get,as I am using a goalpost front bar and a narrow buzz bar rear and other bits I had, the quality isn't all that I don't think really needs a proper tap and die cutter set running over them to make them better, the threads are a bit poo on them. Probably good 10 ten yarders but I just know they will annoy me 😁 Black would be good, get em rough sanded, steel primer, then spray em (I would) Quote Link to comment Share on other sites More sharing options...
elmoputney Posted March 29, 2020 Author Report Share Posted March 29, 2020 1 hour ago, Highy said: Black would be good, get em rough sanded, steel primer, then spray em (I would) I may be able to grit blast them at work which might be easier, dunno if I want to paint them black though, not when you can buy black singles it would need to be different 😬😁😉 I can feel a project coming on 😁 Quote Link to comment Share on other sites More sharing options...
... Posted March 29, 2020 Report Share Posted March 29, 2020 8 minutes ago, elmoputney said: I may be able to grit blast them at work which might be easier, dunno if I want to paint them black though, not when you can buy black singles it would need to be different 😬😁😉 I can feel a project coming on 😁 Black Singles (Korda?) Well overpriced, I couldn't find any NGT singles anywhere before I bought the KNX pod, I would of had a go at painting em black too, £30 (ish) pound for singles, I would have done sanding at work, painting also. May look for some n have ago too 😁 Quote Link to comment Share on other sites More sharing options...
elmoputney Posted March 29, 2020 Author Report Share Posted March 29, 2020 10 minutes ago, Highy said: Black Singles (Korda?) Well overpriced, I couldn't find any NGT singles anywhere before I bought the KNX pod, I would of had a go at painting em black too, £30 (ish) pound for singles, I would have done sanding at work, painting also. May look for some n have ago too 😁 Any old black buzz bars would do if you have any? Then all you need is the threaded uprights and a couple of small banksticks possibly available in black Quote Link to comment Share on other sites More sharing options...
elmoputney Posted March 29, 2020 Author Report Share Posted March 29, 2020 There are other ways of making a similar set up in black on the cheap I think 👍 bare with me I'll do some research Quote Link to comment Share on other sites More sharing options...
... Posted March 29, 2020 Report Share Posted March 29, 2020 9 minutes ago, elmoputney said: There are other ways of making a similar set up in black on the cheap I think 👍 bare with me I'll do some research I do like the way they look and how smart, but stability is what I mainly want. Think I'm gonna stick with Pods, but think gonna go for 3 rod Licence and up my pod the 3 Rod KNX pod. elmoputney 1 Quote Link to comment Share on other sites More sharing options...
... Posted March 29, 2020 Report Share Posted March 29, 2020 Looking at the Saber Low Profile Compact Pod. Quote Link to comment Share on other sites More sharing options...
elmoputney Posted March 29, 2020 Author Report Share Posted March 29, 2020 Did you see this one they are releasing? ... and B B 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.