Nutcracker Posted February 3, 2017 Report Share Posted February 3, 2017 I like the look of these they dnt allow the tail rubber to be pushed on all the way and the whole lot slides off. Sent from my SM-G925F using Tapatalk Quote Link to comment Share on other sites More sharing options...
phildalton1982 Posted February 3, 2017 Report Share Posted February 3, 2017 I like the look of these they dnt allow the tail rubber to be pushed on all the way and the whole lot slides off. Sent from my SM-G925F using Tapatalk Prologic do something similar, they call it the distance clip. Thinking behind metal arm is it doesnt snap when you give it a big heave ho on the cast, i broke a standard clip one the other week Sent from my LG-H955 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Nutcracker Posted February 3, 2017 Author Report Share Posted February 3, 2017 I haven't, not sure I like the way they show it with the tail rubber rammed right up. The novice angler will just use it as shown. If I was wanting to cast further, I would be using a heli set up, rather than a lead clip. Just my own preference. I still think its an improvement thoe and a step in the right direction ... the tail rubber may be pushed right upto it ... but without that i still see novices pushing it right the way upto the butt ... atleast with that its not pushed fully on ... but yea its still on too far for my liking. Quote Link to comment Share on other sites More sharing options...
phildalton1982 Posted February 3, 2017 Report Share Posted February 3, 2017 Safety is paramount, can you use a heli set up on mainline or only leadcore?? Sent from my LG-H955 using Tapatalk Quote Link to comment Share on other sites More sharing options...
David_gravesend Posted February 3, 2017 Report Share Posted February 3, 2017 Safety is paramount, can you use a heli set up on mainline or only leadcore?? Sent from my LG-H955 using Tapatalk Both Korda and fox do naked line heli set ups Quote Link to comment Share on other sites More sharing options...
phildalton1982 Posted February 3, 2017 Report Share Posted February 3, 2017 Yeah but are they safe? Im not happy with the swivel being rammed down by the lead causing a possible break. Especially after a long awaited bite! A chod is a heli rig, one and only time i used one i had a bite, picked it up, line parted by link for lead. Yes i was using buffer this, safety that BUT still broke, and yes my knot was strong Sent from my LG-H955 using Tapatalk B.C. 1 Quote Link to comment Share on other sites More sharing options...
Nutcracker Posted February 6, 2017 Author Report Share Posted February 6, 2017 Korda do a buffer that sits on the lead and the chod just sits on it. Quote Link to comment Share on other sites More sharing options...
Nutcracker Posted February 6, 2017 Author Report Share Posted February 6, 2017 Also these are a very good allows the lead to drop off on a heli/chod rig ... once pressure is applied on the hooklink ... i always like the lead to fall off as during the fight i find the lead moving about can weaken the hook hold. Quote Link to comment Share on other sites More sharing options...
salokcinnodrog Posted February 6, 2017 Report Share Posted February 6, 2017 (edited) For absolute distance casting the helicopter set-up is probably best. Fairly tangle free, and the lead tows everything tidily behind it. I am another one who does not like to lose the lead, as said with a helicopter, the lead helps the rig slide free in the event of a break off. If you do want a pendant lead, then I actually prefer a run ring, far better than a lead clip in my personal view. It can be fished semi-fixed with a tight line, and with the run ring able to slide off in the event of a break, there is no weight holding the hook in place. Edited March 26, 2017 by salokcinnodrog Typo pooter and fangus15 2 Quote Link to comment Share on other sites More sharing options...
yonny Posted February 7, 2017 Report Share Posted February 7, 2017 On 2/3/2017 at 09:45, DEANO30 said: I like the look of these they dnt allow the tail rubber to be pushed on all the way and the whole lot slides off. Sent from my SM-G925F using Tapatalk I use these for zigs. They drop the lead much better than your std lead clip. Wet the clip and just push the tail rubber on a tiny bit. Drops the lead every time and can withstand big casts. B.C., Nutcracker and kevtaylor 3 Quote Link to comment Share on other sites More sharing options...
keeno86 Posted March 26, 2017 Report Share Posted March 26, 2017 On 2/6/2017 at 10:33, DEANO30 said: Also these are a very good allows the lead to drop off on a heli/chod rig ... once pressure is applied on the hooklink ... i always like the lead to fall off as during the fight i find the lead moving about can weaken the hook hold. Lqast year i had the plastic hook in the korda helisafe stap on a big cast numerous times in one session, i found that anything more that 2.5-3oz weights would do this even on a reasonable cast. Quote Link to comment Share on other sites More sharing options...
salokcinnodrog Posted March 26, 2017 Report Share Posted March 26, 2017 On 14 June 2012 at 09:03, salokcinnodrog said: Safe Helicopter set-up which works with Naked Chod or leaders A length of stiff tubing, and a Tail rubber at the end, and a large ring swivel. The beads are soft rubber beads, and under LIGHT pressure do release, so there is no way that the fish should get snagged up and be left trailing any more than just a rig. The length of tubing can be used as a short length shown, or can be used longer if you would like a more Silt style set-up. As can be seen from the second pic, the lead is held onto a quick link swivel by the wide end of the tail rubber. Again this tail rubber can eject from the tubing, and in addition the lead should be able to be ejected safely. If you use it with a leader, please make sure that the top bead can slide over the leader knot and that the rig swivel can also go over it, although any leader increases the chance of a tethered fish. I would suggest that if there are any snags or weed then the leader is dispensed with. On 3 February 2017 at 14:49, phildalton1982 said: Safety is paramount, can you use a heli set up on mainline or only leadcore?? Sent from my LG-H955 using Tapatalk On 3 February 2017 at 15:11, David_gravesend said: Both Korda and fox do naked line heli set ups On 3 February 2017 at 15:17, phildalton1982 said: Yeah but are they safe? Im not happy with the swivel being rammed down by the lead causing a possible break. Especially after a long awaited bite! A chod is a heli rig, one and only time i used one i had a bite, picked it up, line parted by link for lead. Yes i was using buffer this, safety that BUT still broke, and yes my knot was strong Sent from my LG-H955 using Tapatalk The line breaking on a naked helicopter set-up is something I discovered years ago, (1994ish), so came up with my own version using stiff tubing and rubber beads. I have copied my post from years ago in Safe Lead set ups Nutcracker 1 Quote Link to comment Share on other sites More sharing options...
yonny Posted March 27, 2017 Report Share Posted March 27, 2017 23 hours ago, keeno86 said: Lqast year i had the plastic hook in the korda helisafe stap on a big cast numerous times in one session, i found that anything more that 2.5-3oz weights would do this even on a reasonable cast. I've used these for dealing with extreme weed with zero problems even when chucking big. I rate them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.