jogon26 Posted June 21, 2009 Report Share Posted June 21, 2009 hi has any one got a any anti tangle methods for running rigs thanks .rich Quote Link to comment Share on other sites More sharing options...
charlieg Posted June 21, 2009 Report Share Posted June 21, 2009 bags, stringers, tape/string or pva nuggets Quote Link to comment Share on other sites More sharing options...
wilfster Posted June 21, 2009 Report Share Posted June 21, 2009 try using a stiffer hooklength material, flouro combi links tend to be pretty tangle proof. Are you using supple braid? Cuz if your finding the rig tangled once you've retrieved it doesn't mean it was tangled while it was out, tangles happen when the lead plugs in weed or slit and the jolt as it comes free does the tangling.. Also a small pva stick will also prevent tangles. Also feathering the cast. Have you tried these mate? Quote Link to comment Share on other sites More sharing options...
jogon26 Posted June 21, 2009 Author Report Share Posted June 21, 2009 i tend to use silkworm 12lb or esp ghost 12lb with 2" of silkworm as a combi but i do use a pva stocking some times but when i use a rig with nothing on it tends to tangle round the lead when i reel in .rich Quote Link to comment Share on other sites More sharing options...
wilfster Posted June 21, 2009 Report Share Posted June 21, 2009 well i'm tempted to say these tangles are most probably happening on the retrieve mate. Quote Link to comment Share on other sites More sharing options...
daleg2008 Posted June 21, 2009 Report Share Posted June 21, 2009 hi has any one got a any anti tangle methods for running rigs thanks .rich Buy those Anti-Tangle boom things. It helps to keep the hooklink away from the lead. Just don't buy the osprey ones as they float! Quote Link to comment Share on other sites More sharing options...
jogon26 Posted June 21, 2009 Author Report Share Posted June 21, 2009 ok thanks its just some times i cast out sit down thinking did it tangle as it hit the bottom and i do tend to fish a lot of clay pits i think i will get 20 meters of pva stocking and put one on every cast .Tight Lines rich Quote Link to comment Share on other sites More sharing options...
daleg2008 Posted June 21, 2009 Report Share Posted June 21, 2009 If i'm using boilies i prefer a stringer. These are the things you need. http://www.esp-carpgear.com/brochure/streamlinersleeves3.html A lot of tackle manufactures do them Quote Link to comment Share on other sites More sharing options...
wilfster Posted June 21, 2009 Report Share Posted June 21, 2009 in all honesty mate i'd never cast out a supple link like silk worm without it being in a solid bag mate. Never gonna tangle off the cast. But there still come back tangled, so i'd say your tangled rigs are happening on the retrieve. Quote Link to comment Share on other sites More sharing options...
salokcinnodrog Posted June 21, 2009 Report Share Posted June 21, 2009 i tend to use silkworm 12lb or esp ghost 12lb with 2" of silkworm as a combi but i do use a pva stocking some times but when i use a rig with nothing on it tends to tangle round the lead when i reel in .rich That will usually be the hooklink falling around the lead as it drops through the water then As mentioned use dissolving foam, PVA bags or mesh, or stringers, or go to kryston superstiff, or feather the cast. All of those methods reduce or prevent tangles Quote Link to comment Share on other sites More sharing options...
samcfc Posted June 22, 2009 Report Share Posted June 22, 2009 that keeps happening with my running rig . i use 15 or 25lb sheath skin it is quite a stiff braid. any ideas? cheers sam Quote Link to comment Share on other sites More sharing options...
jogon26 Posted June 22, 2009 Author Report Share Posted June 22, 2009 thanks for all the advice will get some anti tangle booms and put all your info into practice on my 24hrs session this weekend thanks. tight lines rich Quote Link to comment Share on other sites More sharing options...
salokcinnodrog Posted June 22, 2009 Report Share Posted June 22, 2009 thanks for all the advice will get some anti tangle booms and put all your info into practice on my 24hrs session this weekend thanks. tight lines rich You don't need to waste money on anti tangle booms A piece of silicon tube, or even a Tail Rubber slid over the hooklink swivel will do the same job , although Solar do (sorry, can't bring myself to recommend ESP gear now, not since they are making ready tied Death Rigs ) Anti-Tangle Sleeves Designed to slip over the hooklink at the swivel or clip end, anti-tangle sleeves prevent the hooklink from tangling round the lead or clip & protect the knot, clip or swivel from damage. Flexible, but still stiff enough to help push the hooklink away from the clip or swivel. Available in Weed Green & Lakebed Brown, x20 per pack. Quote Link to comment Share on other sites More sharing options...
daleg2008 Posted June 22, 2009 Report Share Posted June 22, 2009 thanks for all the advice will get some anti tangle booms and put all your info into practice on my 24hrs session this weekend thanks. tight lines rich You don't need to waste money on anti tangle booms A piece of silicon tube, or even a Tail Rubber slid over the hooklink swivel will do the same job , although Solar do (sorry, can't bring myself to recommend ESP gear now, not since they are making ready tied Death Rigs ) Anti-Tangle Sleeves Designed to slip over the hooklink at the swivel or clip end, anti-tangle sleeves prevent the hooklink from tangling round the lead or clip & protect the knot, clip or swivel from damage. Flexible, but still stiff enough to help push the hooklink away from the clip or swivel. Available in Weed Green & Lakebed Brown, x20 per pack. I've found some of these float aswell. Especially when using a very supple braid. Also the Esp Heat Shrink floats when used to cover the swivel, thats wehn its shrunk down aswell. They lift the rig off the bottom. jogon26 When you get to the lake and decide what rig you want to use make another 3 exactly the same rightdown to the mm. it may sound daft but really supple changes could drastically change results. Once you have 4 rigs the same put the super stiff on all 4 rigs i give it a good 30 minutes to dry up. I have found this is when it is really stiff. while you are waiting for them to dry you can then do offer stuff set up your bivvy watch the water etc..... now put two in your rig wallet and attach the other two rigs to your rods. so now when you catch a carp or say get your cast wrong you can tie on the two all ready stiff rigs without waiting for them to dry again. make as many rigs as you want depending on casting skill Its just i don't find the reccomended time of 90 seconds isn't long enough for me to be confident in casting them without tangling. especially when they are wet! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.