newmarket Posted August 24, 2012 Report Share Posted August 24, 2012 Morning chaps , uncle newmarket is here to pick your brains again This time its a question for who uses or has used the attx v1 receiver and dongles. I've aquired a v1 receiver and a couple of dongles and i've been trying to programme my eos x alarms into the receiver so that i can use it on my overnighter this weekend but i'm having problems. Once the receiver is switched on and all the led's are lit up , the instructions say to hold down the button at the side of the receiver and "beep" the first alarm till the first led goes out. Then , whilst still holding down the side button, "beep" the second alarm and so on....... Trouble is , ive taken "beep" to mean "switch on" , when i switch on the first eos nothing happens at all. The first led on the receiver remains lit and nothing changes . I dont think i'm doing it correctly , anybody out there got any ideas ? Or am i doing it correctly and just got dodgy batteries in the dongles ? I've had a good look through the search facility nick Quote Link to comment Share on other sites More sharing options...
boheleven Posted August 24, 2012 Report Share Posted August 24, 2012 beep to mean bite indication.... so have the alarms on then move the roller to beep and sync with the receiver Quote Link to comment Share on other sites More sharing options...
newmarket Posted August 24, 2012 Author Report Share Posted August 24, 2012 Ok Now do you know what mate ? I did exactly that last night to no avail and it was then that somebody misinformed me that "beep" the alarm meant to switch it on doh ! Anyway , i've just tried it again and the damn things worked this time and made me look like a prize melt ! Its programmed the two eos' onto led 3 and 5 respectively which isnt ideal but i dont care at the moment, i just want the system to work full stop. Wonder why its done that ? Quote Link to comment Share on other sites More sharing options...
Guest keenook Posted August 24, 2012 Report Share Posted August 24, 2012 It's a miracle! Quote Link to comment Share on other sites More sharing options...
newmarket Posted August 24, 2012 Author Report Share Posted August 24, 2012 Yes thank you boy george I would like to know though, why it programmed my 2 alarms onto random led's rather than the first two ? Maybe its something to do with the previous owners alarms & its stll programmed for them ? Quote Link to comment Share on other sites More sharing options...
dougmoon Posted August 24, 2012 Report Share Posted August 24, 2012 here is the instructions for the v2 i presume they are the same http://www.attackle.com/uploads/manuals/08f0f333ebbad1fa47f97e63898fb93f4bc614b3.pdf doug Quote Link to comment Share on other sites More sharing options...
Guest keenook Posted August 24, 2012 Report Share Posted August 24, 2012 Contact ATT direct, very personable indeed! Quote Link to comment Share on other sites More sharing options...
newmarket Posted August 24, 2012 Author Report Share Posted August 24, 2012 Yes thank you boy george I would like to know though, why it programmed my 2 alarms onto random led's rather than the first two ? Maybe its something to do with the previous owners alarms & its stll programmed for them ? Quote Link to comment Share on other sites More sharing options...
newmarket Posted August 24, 2012 Author Report Share Posted August 24, 2012 How on earth ? cyborx 1 Quote Link to comment Share on other sites More sharing options...
salokcinnodrog Posted August 24, 2012 Report Share Posted August 24, 2012 Someone doesn't read their wordpad C&P's when making a post I'm not sure if the V2 is the same set-up for tuning dongle to receiver, but I switch the alarms on with dongles in place, hold the button on the side of receiver and switch that on holding the button down. The first led should flash, bleep the alarm once to tune it to receiver, led should stop and next one starts flashing, same procedure until sorted as per all alarms. Quote Link to comment Share on other sites More sharing options...
canontroop Posted August 24, 2012 Report Share Posted August 24, 2012 V1's, i'd sleep nearer the rods and toss 'em in the lake! Never much cop V1's. Quote Link to comment Share on other sites More sharing options...
newmarket Posted August 27, 2012 Author Report Share Posted August 27, 2012 just for the record i used `em at the weekend and they work fine (on test that is , they never went off during the night but thats another thread) so as usual thanks for everyones helpful input and mr keen for the cabaret Quote Link to comment Share on other sites More sharing options...
Manhole Posted November 20, 2016 Report Share Posted November 20, 2016 Attx v1 i have done all above new battery in v1 dongles and reciever when hold button in and turn receiver on all lights stay on even when release thebutton first light dont flash alarm on before turn receiver on Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.