salokcinnodrog

Yep thats all I do. Putty or Lead wire. Putty is better as Lead Wire can grip too tightly. I have the same thought as you which is why I tie my Running Leads on and PVA them in place for Casting.

Thats Easy Lol:D Whats almost every landed Carp got in Common? you know that the Fish that you catch aren't after the Bait? Its the hook they're after. (With Thanks).

I use Running Leads for most of my Fishing in weedy waters. As for a swivel at both ends of the Running Lead section PLEASE don't do that. If you have a crack off or mainline Break above the top swivel a Fish is left towing a Hook and a lead. Because the lead is not fixed in any point the Carp could be at Great Risk, especially if the Lead or Line gets Tangled in a Snag. I Repeat, Don't use this method of having a Running/Bolt Lead. To have a break away effect tie the Lead to your Run Ring with light Line, I normally use 4lb Maxima. Because of the extra pressure on the cast I then additionally tie the Lead on with PVA string, which dissolves on reaching the Lakebed. The Run Rings I use are in the Solar Run Rig Kit, they come complete with Tubing, Run Rings, Beads and all you need for Running Leads. If I want to create a Bolt effect I just mould a piece of Heavy Metal Putty around the end of the Tubing. This has 2 effects: It weights the tubing flat to the Lakebed as long as the Line is not Dead Tight, so allow some slack. It also gives the Rig the Jolt as the Lead hits the Putty. However if the Mainline Breaks and the Carp is towing a rig, the putty will slide off the Tubing and allow the Lead to come off. This then means I have 2 safety points, a lead that can come free from the Run Ring if it snags, and also allows the Run Ring and Lead to come free in the event of Breakage.

I wouldn't worry about the size of hook you're using, looks alright to me. I use 18mm Boilies on a size8 Carp-R-Us Nailers or Centurions on my water and have landed hard fighting fish up to 25lb on them with no problem. Personally I think In terms of hooks, the smaller hook you can get away with, then the better penetration you get in relation to the Lead Size. In other words smaller hooks work well with Smaller Leads, and their effectiveness is magnified if you increase your Lead Size. To prove that attach a rig with a size8 to a 11/2oz lead and try to lift it up with your finger. Then try the same again with a 2or3oz Lead. I bet that with the small hook it will be impossible and bring tears to your eyes every time.

My basic rigs are so simple that I can tie them with my eyes shut. The only things I change normally are hair length and the length of the Hooklink. Bottom Bait Rig Overhand knot Loop in the end of the hooklink, put bait on as that will be your hair. Knotless Knot Hook to hooklink with bait at distance you want your hairlength to be. Tie swivel on at other end at the length you want your hooklink to be. If you want to increase the angle of the hook I do exactly the same thing but put shrink tube on and create proper Line aligner with line coming out about 5mm from end of Shrink Tube. Pop-up Rig Instead of tying overhand knot I tie a Uni knot and put Pop-up in the loop and pull knot tight down to bait. Exactly same procedure using a long shank hook, but never put shrink tube on Hook. This way I can change bait easily, don't worry about it slipping as the knot only seems to pull tighter to the bait.

Lol:D What do you want to fish with? Are most people fishing your Water(s) with Braid, coated Braids Mono or Fluorocarbon? Find out what they are doing, what has worked in the past and do something different. Most people on my Water fish with Fluoro, so I fish with Coated Braid. Coated Braids, Mono and Fluorocarbon resist Tangles better than standard Braids, but standard Braid because of its suppleness can make ejection of the hook difficult. Mono and Fluoro because of their unexpected rigidity/stiffness can make ejection difficult. Coated Braids mean you can fish with a Stiff section and a Supple section. because the Carp may not expect it, it may make ejection Difficult. Find what works for you and have every confidence in it. :D

Tulip beads are for protecting your knot where the Line joins the swivel. They also have other uses though. Tubing can be threaded into the narrow end. You can use this section of tubing for Running Rigs or for attaching Inline Leads. The Tulip bead will actually slot in quite tightly into Korda InLine Leads. Tail Sleeves, normally used for holding Leads onto Lead clips, also for Knot protection with Tubing Insert same as Tulip Beads. Can also be used to hold the Hooklength away from the mainline by sleeving the Swivel knot on the hooklink. As for the other question, have a look at Solar Rigs diagrams that come with Rig Pieces or their Website.. They give an explanation of every bit or End Tackle.

I'd take Adam's idea. There are so many different variables on Hair Length. Unless you understand why you are using a particular Rig then ou are going to get caught out when it gets sussed by The Carp. London_geeza's hairs are totally different lengths to the way I fish, and probably most other peoples are different from me and him.

You make your own rigs so you don't have that problem. You have just found one of the problems with buying Ready Made Rigs, there are others: You can't change the length of the Hooklink, you can't change the length of the Hair to suit your own Fishing. You don't know how perfectly the Knots have been tied. I don't ever trust anyone else's knots in my fishing, and even my mates don't trust mine, despite the fact I have not had a knot slip or break in a long time. If you do need to put a new hair on try tying the hair to the eye of the hook with Hair Braid or thin nylon, if its covered, Sorry, you are stuck. My best suggestion is to learn to tie rigs yourself as no Shop Bought Rig will cover all of the situations that you are likely to face. :D

Have a look at the diameter of the Lines compared to their Breaking Strain. That should give you some idea of their quality and Integrity. I won't change lines just for the sake of trying a new product until I have thoroughly tested and compared it to other items I use. If its better quality I'll change. Most Daiwa Stockists will have Sensor Line, if they haven't, then a decent Tackle shop will get it in for you. Sensor Bulk Spools come in 6or8pack Boxes, so won't be on the shelf for too long.

Adam, have a look at the Line Diameters of various 15lb Lines. I can tell you that Sensor is 0.355mm, most others are 0.38-0.40mm, which actually means they are 18-20lb Mono. London_geeza and I got quite into this on another Thread.

Daiwa Sensor Monofilament, in the Natural Brown colour. Don't think Clear is quite the same mono, although I could be wrong. The Brown/green finish on the original is camouflaged anyway when its in the water. The water I fish is Dead Clear, and I couldn't see it against the bottom from 30cms away while I was standing in the water. As for spool size, to fill a Reel or 2 you should be buying Bulk Spools anyway. Don't get into Braid vs Mono, there is a vast difference between the 2.

I use the same as Adam, Daiwa Sensor in 15lb. Reliable, Abrasion and Sheer Resistant, and Budget Priced (cheap). Still check it and change it regularly. Method fishing 12lb should be ok, don't blast as hard as you can, cast to a comfortable sensible distance. Worry about your rods more, a Method Feeder can weigh up to 5-6ozs with a loaded Method feeder on it

Mind you, wonder if I can convince a Bait Company to produce a Chop Your Own?

Can't claim the Idea, its already been in Print, CarpWorld, the GREAT Jim Gibbinson wrote about it. I had used the idea previously though, to try and throw off the Bait Sneakers who occasionally go through the Bivvy when you are playing loads of fish to find out what your up to. lol:p :D That messed them:D :D

I use the Kryston Coated Braids for most of my fishing now, Mantis, Mantis Gold, Snakeskin and Snakebite. If you want to remove the outer coating, I use my Thumbnail and work it free, although the Plastic Child Safety Scissors are good at breaking just the outer Coating apparently. Always use a Grinner or Uni knot. Allow yourself plenty of extra to work with. If you use a Knotless Knot put your bait on before you tie the Hairlength and hook. When tying your swivel on at the other end of the hooklength make sure you lubricate the knot as you slide it tight. It knots the same on the Inner Braid/Multistrand as it does on the coated outer, just take your time making sure your knots are nice and tidy.

lol You make your own Baits? Instead of cutting and rolling the sausages into Balls, you boil the sausage as you would an ordinary boilie. I don't think any Tackle shop sells them and no I don't think Boilie Sausages have a website. :D

Try using Liquidised bread, luncheon meat, peperami mashed/liquidised and chunks, sweetcorn (dry it out with breadcrumb), tuna chunks in sunflower oil. See also point about BFM chops You can mix all of the above as a groundbait, use it as a Stick or put it in a bag. Nick

I'm past all that, honest! I've left my Rule Breaking days behind me, besides No Rules that strict on my water at the moment. (Thats probably closer to the Truth)

lol Hi Sam, and welcome. Hooklinks materiall I have found Mantis is very good, because of the outer coating it is quite Tangle free, but of you want a green Flecked Braid have a look at Merlin as well. I keep quite a few secret baits hidden in the Tackle Box. BFM Boilie sausages that look like peperami, complete with Peperami wrapper around it:cool: Also try the real peperami, that will catch carp and is fairly small fish resistant, just don't eat it all yourself. If you put sweetcorn in as a freebie, use Maize on the hook to put off smaller fish. And I don't ever advocate Breaking Rules.

My Thoughts exactly, stuck with what you get. Right Pain if you need to change hairlength or have a longer hooklength. Occasionally I'll tie a hair on out of nylon or Hair Braid, something a bit more supple than the Continuation of the Hooklength. You will need to tie decent knots for that as well.

Please don't say buys Ready Tied Rigs... Urgh:rolleyes: If you tie your own rigs its easy enough to Knotless Knot the hook on giving you the Hair. You can even get the exact Hair length if you put the bait on the end as you tie the Knotless Knot.

Blooming Heck! Using granny knots is not at all safe for you, or the fish. NEVER use a Granny Knot Learn to tie the Uni knot or Grinner knot, never had one of these come undone or break. They are probably the safest knots to use in fishing and you'll use them for almost everything, Braids, Mainline to swivels. Have a search around the Forum as there is a knot tying thread on here somewhere. When tying each and every knot make sure you lubricate them with spit to prevent the coiling/curling up, it will also prevent damage to the line as you pull the knot tight. When you have learnt to tie the knot properly then practise it until you are 100% certain of your Knots every time. Then when you tie each knot test them before you cast out.

I have a mate who had an Unexplained Breakage last week using Hybrid, he's since gone back to the Kryston Coated Braids and landed fish with no problems.