true_carp_king Posted September 22, 2008 Report Posted September 22, 2008 Self explanitory really? anybody got any theorys which work because it can be tricky with a thicker diameter line! the tubing im talking about is normal sized esp rig tubing the rubber type stuff? matt
666carpcatcher Posted September 22, 2008 Report Posted September 22, 2008 What size bore hole is it? the ESP tubing comes with diff sizes? There is another thread on it somewhere aswell
666carpcatcher Posted September 22, 2008 Report Posted September 22, 2008 I cant find the other thread on it The best way i found was to keep everything dry, and make sure the line had a clean cut (you can even cut it so its got a point) then keep the tubing as staright as possible and it should flow free quite easily
bluebirdjones Posted September 22, 2008 Report Posted September 22, 2008 Quote I cant find the other thread on it Here's a couple https://forum.carp.com/carp-forum/viewtopic.php?t=22479&highlight=tubing+mainline https://forum.carp.com/carp-forum/viewtopic.php?t=16893&highlight=thread+tubing
Malc 1950 Posted September 22, 2008 Report Posted September 22, 2008 Start at one end of the tube and feed the line through, making sure the line and tube is dry and kink free.
666carpcatcher Posted September 22, 2008 Report Posted September 22, 2008 Quote Quote I cant find the other thread on it Here's a couple https://forum.carp.com/carp-forum/viewtopic.php?t=22479&highlight=tubing+mainline https://forum.carp.com/carp-forum/viewtopic.php?t=16893&highlight=thread+tubing Cheer's, they wernt the ones i was looking for but there a start, there was one only a few months old, and had a few good ideas in it
Recommended Posts