Richard713

Hi Everyone, it looks like my original post has triggered quite a debate! Let me first explain where I am coming from. I've only been carp fishing for around a year or so now and all of my fishing has been done using a lead clip and safety is something which has been and always is front of my mind when carp fishing. I now want to try using Solid PVA Bags. Having done my research it appears using a lead clip with a solid PVA bag is not really the best route to go down so I've spent a bit of time looking into the inline lead setup. I purchased a few Fox inline leads and quickly realised that these leads alone are really not safe straight off the shelf. There is a hard plastic insert which fits inside the lead and gives the swivel something to sit inside of. The problem is, it fits in so tightly that there is no way that lead is coming free from the plastic insert should it need to! I've taken out the plastic insert and instead used a soft tail rubber which you'd normally place over a lead clip. As this is softer with it being rubber it releases with minimal force and would slide up the line / leader to should it be required, it also fits into the lead almost perfectly. Maybe I am wrong, but that is my take on inline leads, maybe other brands except Fox are different with regards to the plastic sleeve insert? Having done the above research I then started to look into how to attach this to my mainline. A lot of people suggested using a leader and alot of the online videos also suggest this for the ease of having several tied up ready to go and simply looping them on and off. It's at this point that as a beginner I'm starting to get confused. Mentioning the word leadcore seems to have sparked a varying reaction but as a newcomer it's difficult to know what or who to believe. I've purchased some leadcore and started to make up some very short lengths similar to the korda pre tied ones, they are also very short. I am slightly confused how a very short length of leadcore can so easily get snagged up, I've always been told to concentrate of ensuring the lead can easily detach from the rig which I'm confident I am doing with this setup. Problem is I'm now doubting leadcore because of the comments in this thread. What can I use if I don't use leadcore? Is it a case of having to tie them up with your mainline directly through the inline lead? Is a piece of 15lb trailing mono any safer? It's really hard to know which way to turn and even more so as a relative newcomer to carp fishing.

First time using leadcore. Trying to splice up a 1 to 2ft length to use with a solid bag. Spliced first end easy. When I go to splice the other end having cut it off the spool, the lead pulls out when trying to pull back the end and reveal the core. It seems almost impossible to splice a short length around a foot long without the lead pulling out. Any tips anyone? 😑

Thanks for the advice. What's your thoughts on the below images. I've taken out the hard plastic sleeve supplied with the lead and used a korda tail rubber which seems to fit perfectly inside the lead with the swivel in the end. Not sure if this is something anyone else has tried? When I put my rig on the swivel and shake it a little the lead pulls away do not does seem alot safer than the hard plastic supplied with the lead.

I've just bought some fox inline leads and korda ring swivels. I can push the swivel into the online lead but it is rather tight. I'm just concern it might not be safe ?

I've just ordered 5L of standard fabsil from eBay for £25. Where did you get your spray bottle from? Looks a good one that!!

I've never used in line leads before. Will a swivel lock inside the end of the lead once you've pulled your leader through it?

I'm not sure which type I have. It only cost 80 quid so I doubt it's breathable. One of them is a chub day shelter again around 80 quid.

Looking to start using solid pva bags. I've only ever used lead clip systems however so I'm just wondering what bits and pieces will be best for getting me started. I realise I'll need an inline lead along with some kind of leader. Ready tied leader or self made etc. I know I'll need a supple hooklink. Just looking for some help and pointers so I buy the correct end tackle really. I've only really got knowledge of lead clip systems and rig tubing, a bit lost when it comes to leaders etc.

Thanks for the help guys. I think I'll try the standard Fabsil, the gold one is very pricey indeed. Haha Problem at the minute is finding a dry day to do it. ...

It looks like great stuff. Thanks!

Cheers guys. The fabsil stuff sounds Good! I've got two bivvies and a couple of overwraps too, does it spread pretty well?

Can anyone recommend a spray or liquid I can apply to my Bivvy? Water isn't running off as good as it used to do, that said it's not the best bivvy in the world but hoping there might be a decent liquid I can apply ?

Has anyone fished this place? www.lakeviewlodgeandfishing.co.uk

I've got a chub Stainless steel buzz bar and bank stick. When I screw them together it's basically metal on metal and I can't seem to get it tight. It always seems to come loose during my session for some reason. Would a rubber o ring help at all?

I can confirm this was the answer that helped me the most. When I do this and then pull as tight as I can, the hair sits perfectly on top of the shank, as desired! So simple, but it always is when you're told how Thank you !

Seems like a bit of a silly question this one but, does anyone find once they've tied a knotless knot and pulled down tight that the hair slips around to the side and doesn't sit on the back of the hook shank? My hair seem to exit on the side or the hookpoint side of the shank which just spoils presentation slightly. As I say, sounds silly but is one of them annoyances for me !!

https://www.cyprinus.co.uk/collections/sleeping-bags/products/cyprinus-carpstar-deep-snooze-5-season-carp-fishing-sleeping-bag This sounds awfully cheap for a 5 season bag?? Just don't like that it's not fleece lined.

I like the looks of this Trakker deal. Fleece lining does sound warm. I'm also on the hunt for a bedchair. AD have a JRC one for £60, do you think it'll be any good? http://www.anglingdirect.co.uk/jrc-contact-lite-bedchair

Just got home and Dad has gone for the Shimano Velocities which do have the 50mm ring, in a 3lb test curve. Looks like he's chucked in a couple of Daiwa reels too, sure will be a very nice setup!

Another tackle related question! Looking for a warm budget sleeping bag. Was out on the bank last week and used a mates JRC sleeping bag, and i was blooming freezing! Think temperatures got down to around 6 or 7 degrees. Any recommendations?

Do you feel the 50mm rings give you anything noticeably extra or just more of a hindrance when storing them and finding a sleeve big enough for them?

I like the velocity ones, can get them for £50 but the 3lb one has 50mm butt rings. The outkasts appear to cost a bit more, £82 on angling direct. Are they worth the extra? Is there much between all these rods? I even like the Wychwood one for £50. I guess if they cast well and handle a fish well then all is good?

My dad is looking to get 2 budget carp rods. He likes my Greys but at £110 a pop are a bit expensive. Think he's looking for 2 for that money. Any suggestions?

Any news on these mate?

Thanks, that would be great! The pastel ones were my favorite too. I'm sure there's something going on - I contacted Angling Direct today as their site was showing all of them out of stock and I was told they were discontinued. I certainly hope they're not ! I did email Nash too, but not confident of a quick response there ...