tucker74
-
Posts
144 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Posts posted by tucker74
-
-
I think your problem might lie with the molasses and the length of time your particles were in the bag/mesh before being used allowing the molasses to be absorbed by the pva. Also oil based paritcles seriously affect the melt time sometimes for the pva not to melt at all, unless it states that it is pva friendly.
A few years ago i pre tied some in mesh with pellets the night before thinking i'd get ahead of the game, and as always i tested one when i got to the bank, 35 mins later it started to break down, turns out it was the oil in the pellet being absorbed into the pva over time causing the problem. So i had to make them as i needed them and they broke down almost straight away.
-
Just another art to be lost in time, knots and whipping wire traces
-
Vinyl,
The day ticket area is at the 3 wiers carp there in the summer when it weeds up, some good pike and zander in there as well, and the season ticket £14 allows you to fish the round the back 1 big wier where the barbel and the chub tend to be and in total about 5 miles of the river heading down by the marina, the ticket did allow you to fish the lake in the marina not so sure now,
It's a picture scene really, lovely place
You've reminded me i need to get off my backside and get down there for my ticket.
good luck.
-
well the syndi members have had access for years,
-
i know they have stopped the day tickets. i'll try and find out for you, a mate of mine's dad use to run it when it was ici a few years ago think he still keeps in touch with them.
-
bit of a newbish question, but how would you tie a fluoro carbon leader set up properly? since not using leaders i see them as all dangerous! i have no idea why, but i just think its because the mainline is always going to snap first, or do i buy spool of x-line and fish straight through? im not rich so i only want to use 300 meters on each of my 2 reels. someone told me to white tape on the spool as backing, but how do you know when you are off 300 meters of filling the spool? in other words how can i spool both with 300 meters accuretly? thanks dale
I am currently using Adrena Line 12lb rated. Its actual BS is listed as 13.4lb.
This is marked by Korda at 250, 500 and 750 mtrs so you can put 250 mtrs on each of three spools and have 250 left for a spare spool.
I currently use Stroft leader at 4.2 kilos which makes it about 9.25 lb BS actual being just under 11lb BS so if I break off the theory is that it will be at the leader or the knot to the swivel. (I only have 1 direct swivel between reel and bait and the lead weight and all its attachments are free running)
Someone may say that I have got it wrong but I am happy with the performance I achieve and have only been broken off by a fish once in the last 3 of 4 years and that was down to the fish ramming me into a snag and leaving me hooked up on it. I tie on via loop to swivel rather than Palomar, though Palomar knot is recommended. It is just my preferred way.
At the end of the day, it`s about having confidence in your reel to bait set up.
I am probably going to cause some controversy and debate here now as I do not use any drop back indicators. Why? Because the line is free to run and because the lead is stationary whichever way the fish runs it will take line thus activating the alarm.
i also use adrinaline but this line breaks where it likes have done some good testing make sure if you use this line your hooklength is of a lower breaking strain. i love this line but for this fact.
3 tests on footy field breaked with 70 yards of line trailing 50 yards trailing and 50 yards trailing. it did not break at the knott once.
its worth testing your main line
-
i'll happly bring this thread to the top again,
try wroxham broad if you have access to a boat far corner, then in the main river up to salhouse in the night but you will be bothered by big bream. had em there nothing massive though but have heard some tails.
-
yep here's what i mean had to get the camera out.
as you can see the main line comes over the back of the sofa and the weight stays straight with line then kicks the boom out to which the hooklength is attached.
close up of the boom
-
the ring on the main line is plastic with one of them g clips on then clip your lead on the g clip thing swivel or not plus with those line rings you can get them with stiff tube which kicks your rig away from the main line through the weight if you get what i mean.
-
worth keeping hold of then, i struggle to find 14s with the spade end these days.
-
nick,
i dont use them for my ledgered baits mate only when float fishing, small hooks no hook turning on the eye, plus the tag end sticking out all over.
it is small fish only routine for me.
tucker
-
curently in the box and tied are
drennan super spec size 2
esp t-6 raptors size 10, 8, 6
fox arma points size 7 & 8
drennan shrimp hook size 8
for float fishing drennan barbless carp spade end hooks size 14 to 18 and kamasan barbless crystal spade end hooks.
i think the spade hooks give a better presentation when using small hooks as the main line comes in down the shank and tag end of the knot follows the direction of the shank of the hook. (hope this makes sense).
-
i guess your talking lenwade norfolk, the pub by the bridge do tickets for there lakes ive had mid doubles out of there on a day session plus also it allows you to fish the strech of the wensum as well on the same ticket, the stetch down from wilsons mansion to the railway bridge at bernard mathews end, had barbel to 8lb and chub to 6lb out of the river, the pub did do a bed & breakfast with the ticket included as well, was £25 a night couple of years ago.
-
yes i fish bosmere hard water not many fish but i liked it till the rule changes. the biggest ive seen out is 28lb. no such luck on my behalf though. if you fish the car park end towards the lilleys you will have some cracking tench and eventually the carp do show there. but you will find more often than not when you wake at 4am on a nice summer mornng the fish are on the oppisite bank the closest swim to that area about 100 yards away, the swim to your right at the hall end.
the other thing with the club if you want to catch fish on short time the thwaite lakes are good fish to mid doubles. had over 250lb of fish in 6 hours of fishing be warned you only need one rod there, twos a hand full.
-
from what i remember the 60lb flouro adds extra weight and is less prone to kinking,
-
i got a mate of mine who buys the mags eventually i get them chucked my way. i think it was advan carp fishing nov08, with an article on some bloke who takes the lead out of the core and replaces it wth a length of 60lb flurocarbon
-
i dont use leaders or lead core and i test every lead that i make to make sure it ejects where it is needed on the take usually.
-
top stuff mate 666
better than me
martyn
-
for standard bottom rig thats the one, for chod style silicone insert both ends then as your first drawing, on the take front end swivel out first, then in thoery the lead flips and slips off it dont take much to dis lodge the lead have played but not tried yet.
but unless the rules say eject leads on the take, this is all point less and we will use re std rigs. neon is unlucky that he has to go this far.
-
sorry jonzey he wanted chod rig, silicone inserts both end of lead as 666 has drawn with swivels inserted, then just add lead the rig wont need retying every time.
-
yeah with you on that one, i,ve seen is using inline lead, leader, and rubber tail. no drawings no good at doing them. bottom swivel tucked in bottom of inline insert, leader goes round the outside, then the rubbr tail on leader comes down onto the top of the inline plastic insert. can you draw that, i cant. full ejection have a go your better at art than me.
martyn
-
666 mate
can yu explain your drawing please, i guess the swivel on the bottom pushed in to the lead with silicone rubber insert poss. not sure?
cheers martyn
-
To back up what keith was saying about the strength of the palomar knot.
i did my own tests with the knot and main line as i do pike fishing as well and in the event of getting snagged i like the line to break at the knot as the wire trace is not going to. my findings were that the main line broke every time at varying lengths and the knot held, i have only tried this on one line maybe different for other lines. so i do not use this knot when piking.
-
i still use dacron on simple run rig with anti tangle boom. my biggest carp come on it 25lb mirror on 2 bits of corn.
Lift Float method
in UK Rig Tying
Posted
i use a drennan no1 stillwater blue, 2 no1 shot and smallest swanshot 6 inchs from the hook, plumb the depth to the swanshot exactly. Any movement of the swanshot will move the float any pick up float pops up a good inch and half.